Bedienungsanleitung Whirlpool FWL61452 (Seite 7 von 19) (Englisch)

702339

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

User manual

FRESHCARE+

This option enhances washing performance by

generating steam to inhibit the proliferation of the main

bad odour sources inside the machine. After steam phase,

the washing machine will perform gentle tumbling through

slow rotations of the drum. FreshCare+ option starts after

the cycle ends for a maximum duration of 6h and you can

interrupt it at any time by pressing any button on control

panel or turning the knob. Wait around 5 minutes before

door can be opened.

INTENSIVE RINSE

By selecting this option, the eciency of the rinse is

increased and optimal detergent removal is guaranteed. It is

particularly useful for sensitive skin.

EASY IRONING

By selecting this option, the wash and the spin cycles

will be modied in order to reduce the formation of creases.

ON/OFF

To switch on the washing machine: press the

“ON/OFF“ button, the “Start/Pause” button lights up.

To switch o the washing machine during the wash cycle,

press and hold the button for approximately 3 seconds. If

the button is pressed briey or accidentally the machine will

not switch o.

To switch o the washing machine after programme end:

press the “ON/OFF“ button until the lights goes o.

KNOB

To select and conrm programmes. Turn to

select.

START/PAUSE

To start the programme, after you have nished your

settings. To pause a running programme. To continue a

paused programme.

KEY LOCK

To lock the control panel, press and hold the

“Key lock” button for approximately 3 seconds. The

corresponding LED indicator lights up to indicate that the

control panel has been locked (with the exception of the

“ON/OFF“ button). This prevents unintentional changes

to programmes, especially with children near the machine.

To unlock the control panel, press and hold the “Key lock”

button for approximately 3 seconds.

FUNCTIONS

OPTIONS

BLEACHING

If you wish to bleach the laundry, load the washing machine

and set the “Rinse + Spin” programme .

Start the machine and wait for it to complete the rst water

lling cycle (roughly 2 minutes). Put the machine in pause

mode by pressing the “Start/Pause” button, open

the detergent drawer and pour the bleach (observe the

recommended doses indicated on the package) into the

main wash compartment where the partition was previously

mounted. Restart the cycle by pressing the “Start/Pause”

button.

If desired, it is possible to add fabric softener into the

appropriate compartment of the detergent drawer.

DEMO MODE

This function is only used for sales presentations. By this

you can interact with washing machine and see it working

without water. To enter Demo mode, switch the washing

machine ON and OFF again. Press and hold “Start/Pause”

button, then within 5 seconds press also “ON/OFF“

button and hold both buttons for 10 seconds.

To deactivate this function, switch the washing machine

OFF. Than press and hold “Start/Pause” button, within

5 seconds press also “ON/OFF“ button and hold both

buttons for 2 seconds.

! If the selected option is incompatible with the programme set, the incompatibility will be signalled by a buzzer (3 beeps) and

the corresponding indicator light will ash.

! If the selected option is incompatible with another previously set option, only the most recent selection will remain active.

TEMPERATURE

Every programme has a predened temperature.

If you want to change the temperature, press the

“temperature” button. The corresponding LED indicator

lights up.

SPIN

Every programme has a predened spin speed. If you

want to change the spin speed, press the "Spin" button. The

corresponding LED indicator lights up.

START DELAY

To set the selected programme to start at a later

time, press the button until the LED for the desired delay

is illuminated (9h - 6h - 3h). After the wash cycle has been

started the indicator light corresponding to the selected

delay period will begin to ash. As time passes, the

remaining delay will be displayed and the corresponding

indicator light will ash. The set programme will start once

the selected time delay has expired. To cancel the delayed

start, press the button until all LED lights are switched o.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FWL61452 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FWL61452

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info