Bedienungsanleitung Whirlpool Monaco 1400 (Seite 2 von 2) (Englisch)

477375

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

5019 301 05229

Whirlpool is a registered trademark of Whirlpool USA.

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized

conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in

the table in relation to the water supply pressure and temperature, the load and the type of wash.

Add the detergents as described in the programme

table or in the chapter “Detergents and Additives” in

the booklet.

1. Open the tap.

2. Set the

programme selector

to the desired

programme.

3. Set the

temperature selector

to the desired

temperature.

Special options

can be selected.

5. Check that the door is well closed and turn on the

washing machine by pressing the

“ON/OFF”

button. The indicator lights up, indicating that

the washing machine is on.

“Half Load” button

• Reduces water consumption, above all during rinsing.

• Suitable for lightly-soiled laundry and small loads

(max 3 kg).

Note:

Reduce the detergent quantity.

“Rapid Wash” button

• For quick, economical washes.

• Ideal for minimum loads of lightly-soiled articles.

Note:

reduce the detergent quantity.

“Intensive Rinse” button

• More water and a longer time in rinse cycle is added.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps

people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid

creasing and prevent colours from changing.

• This option is particularly recommended for the

programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to

postpone spinning to a later time, or if you want

to drain only.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the

final spin cycle for the present wash programme.

If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme.

“Spin Speed Reduction” button

• Reduces the predetermined automatic maximum

spin speed.

In some programmes the maximum final spin speed

is limited to go easy on your laundry items.

Selection of a higher spin speed is not possible.

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours : minutes)

Cotton 95 5.0 49 1.70 1:50

Cotton 60 5.0 44 0.95 2:00

Cotton 40 5.0 44 0.55 1:50

Synthetics 60 2.5 55 0.80 1:25

Synthetics 40 2.5 50 0.60 0:50

Delicates 40 1.5 50 0.50 0:45

Wool 40 1.0 50 0.50 0:40

Silk 30 1.0 37 0.40 0:40

ADD DETERGENTS, CLOSE THE DOOR AND SELECT

THE PROGRAMME

SELECT ANY DESIDERED OPTION

To reselect a programme when a cycle has already

begun:

1. Switch off the appliance by pressing the

“

ON/OFF

” button.

2. Select the new programme.

3. Start the programme by pressing the

“

ON/OFF

” button.

1. At the end of the programme the programme

selector moves to the stop position.

2. To unload the machine wait for the door to

unlock (about 1 minute).

3. Switch off the appliance, open the door and

take out the laundry.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

•

WATER LEVEL

It may not be visible as the cycle is optimised

for a minimum water consumption without

compromising washing results.

•

SPIN SPEED CONTROL

Spin speed may be reduced automatically or

may even be excluded in the case of small

loads with highly absorbent garments (e.g.

bathrobes, bathmat).

This control avoids cloth and machine

damage and excessive vibrations and

consequent noise produced by the machine

due to load unbalance: by selecting high spin

speeds the noise level increases.

•

MOTOR NOISE

The running noises of the new, electronically-

controlled motor are not the same as the

ones you are used to from your old appliance.

Don’t be surprised - modern technology has a

modern sound.

•

CLEANING THE FILTER

To ensure an impeccable function of the

pump, check the filter regular and clean it if

necessary.

PROGRAMME CHANGE

PROGRAMME END

NOTES AND INDICATIONS FOR USE

3gb05229.fm5 Page 2 Wednesday, July 11, 2001 5:57 PM

Black Process Plate

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool Monaco 1400 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool Monaco 1400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info