- the sensor technology adapts drum movement, water, energy and pr ogramme duration to your wash load
5019 300 01130
Soil l ev el” button
• Adapts the programme duration to the soil level
of your laundry . Also influences the det ergent
quantity recommen dation when using the
“Dosing Aid” button.
= lightly soiled - = normally soiled -
= heavily soiled
Not all soil levels are selectable for each
programme .
“Spin ” button ( incl. “Rinse Hold” )
• S elect a spin speed differing from the preset
one.
• Press the button to set another spin speed.
• If you select spin speed “0”, the final spinning is
cancelled and the water is drain ed out only.
However, intermediate spin phases remain
during the rinse.
• If you select “Rinse hold” , the laundry
remains in the last rinse water without
progressing to the final spin cycle, to avoid
creasing and prevent colours from changing.
To activate the “Rinse hold”, press the “Spin”
button repeatedly until the “Rinse hold” symbol
on the display lights u p.
- The wash programme stops to “Rinse hold”
when the “Rinse hold” symbol on the
display blinks; the “Start/Pause” indicator
blinks as well .
- To terminate the “Rinse hold” by spinning the
laundry, press “Start/Pause” - the laundry will
be spun with the default s pin speed. You can
also select another spin speed with the “Spin”
button before you start t he spin cycle with
“Start/Pause”.
- To terminate the “Rinse hold” by dra ining the
water without spinning, press the “Spin”
button until spin speed “0” appears on the
display; then press “Start/Pause” to start the
draining.
- Do not leave the laundry to soak for too long
in the “Rinse hold” (especially silk!).
With this function you can postpone your
programme to complete at a later time: press the
button to select in how many hours the programme
shall be finished. Thus, it allows you to have your
laundry ready at a particular time and to profit from
more favourable energy rates during the night, for
example.
• D o not use liquid detergent when activating this
function.
• The time until the “C ycle end” can be selected in
full hour time segments (1 to 24 h). W hen you
press the button, the shortest possib le time will
be displayed; keep on pressing the button to
loop through all the available t imes. T o remove it
again, keep on pressing the button until you see
the value “0:00” .
• When you have selected the desired time until
the “C ycle end” , pr ess “Start/Pause” - the
countdown will begin.
• Dur ing the countdown, you can still modify the
programme setting (select or deselec t options,
change spin speed etc.). If the modifications
prolong the programme duration so that it
overruns the originally set time until the
“C ycle end” , the pr ogr amme will start
immediately .
• Sometimes the programme may finish before
the selected time until the “ C ycle end” has
expired (e.g . for small loads). In this case, the
washing machine will tumble the laundry
regularly to keep it fresh, until the selected
“C ycle end” time has expired. During tumbling ,
the display will show an animation. The
tumbling phase can be stopped at any time
either by pressing an y butt on or by rot ating the
programme selector; the animation will stop
and the door will unlock in about 1 minute as
indicated on the display.
With the “Dosing Aid” button, you can make your
washing machine indicate you the recommended
detergent quantity for your wash load , depending
on the soil level selected and the size of the load.
• Helps to save detergent and protect the
environmen t and also sensitive skin by avoiding
detergent over dosing.
• Before you use this function, you must adapt the
washing machine to the dosing amounts which
are recommended f or the detergents y ou use.
Also check if your region’ s water hardness
corresponds with the water hardness level “ soft ”
of your washing machine - if not adapt it.
• Selec t programme, options and cycle end
BEFORE using the “Dosing Aid” button.
For any details, refer to the separate “Dosing Aid”
Instructions fo r Use.
Before starting and after end of a programme, the
indicator lights to show that the door can be
opened. As long as a wash programme is running,
the door remains locked and must on no account
be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Reset a running
programme be fore the end”.
SET CY CLE END
DETERGENT DOSING
REC OMMEND A TION
“DOOR OPEN” INDICA TOR
The “Eco monitor” gives you a rough feedback
about the power consumption of the programme
setting you selecte d.
As soon as you turn the p rogramme selector to any
programme, the “Eco monitor” is on.
.
The indicator on the left is to show that the “Eco
monitor” is active.
The four indicators next to it show the degree of
consumption: the less power your programme
setting is forecasted to consume, the less indicators
will light up. This depends on the programme,
temperature and options selected, and al so on the
size of the wash load.
For that reason, the forecasted degree of power
consumption may adapt when the washing
machine detects the wash load.
Open the tap and press the “Start/Pause” button
. The “Start/Pause” indicator lights up.
When the laundry lo ad is detected or the
programme duration is adapted, the display shows
an animation.
Prevents children from starting a wash cycle or
changing the settings of a running programme.
Cannot be activated or deactivated when the
programme selector is in the “Off/O” position.
To activate the child lock:
• T urn the programme selector to a programme
position, or run a programme as usual.
• Press the 2 buttons marked with the key
symbol simultaneously for at least
3 seconds. A key-like symbol will sho rtly appear
on the display to indicate that the child lock is
active.
Any time you try to change a programme setting
with active child lock, the display w ill briefly show
the key-like symbol. The p rogramme setting cannot
be changed anymore. The only change possible is
to switch the washer off by turning the programme
selector to the “Off/O” position.
To deactivate the child lock , proceed in the same
way as for activ ating it.
If one of the failure indicators lights up, or in case of
any malfunction, consul t the “Troubleshooting
Guide” in your Instructions for Use.
Spin speed on display blinks: Unbalance during
spinning.
• The “Door open” indicat or lights up. T he
display shows “End” . After about a quarter o f an
hour , the washing machine will switch off
complet ely to sa ve ener gy .
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machin e.
4. Leave the door ajar to allow the drum to dry.
The symbol will light up at the end of the
programme if you used too much deterg ent. Use
less detergent next time.
1. Press the “Sta rt/Paus e” button to pause the
programme. The indicator blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “St art /Pause” button again. The
new programme continues at the same
position where the previous programme was
interrupted. Do not add detergent for this
programme.
The “Reset/Drain” butt on cancels a running
programme.
•P r e s s a n d h o l d t h e “Reset/Drain ” butt on
for a few seconds; an animation ap pears on the
display . The water is drained out; it ma y last
some time until yo u can open the door .
EC O MONIT OR
PROGRAMME ST ART
CHILD L OCK
FA I L U R E I N D I C AT O R S
PROGRAMME END
DETERGENT OVERDOSA GE INDICA T OR
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME ST ART
RESET A RUNNING PROGRAMME
Whirlpool is a registered trademark of Whirlpool USA