Bedienungsanleitung Whirlpool SMC 604 F-NE (Seite 8 von 13) (Englisch)

709152

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Use & Care guide

SOUNDS PRODUCED DURING OPERATION

Hobs may produce noises during normal operation.

During the pot recognition phase, the hob produces a click sound, while

during cooking, hissing or crackling sounds may be heard. Hisses and

crackles actually come from the pots, and are produced by specic

features of the base of the pot being used (for example, when a base is

made from several layers of material, or is irregular). These noises may

vary depending on the accessories used and the amount of food that

these contain, and do not indicate any type of defect.

TROUBLESHOOTING

• Check that the electricity supply has not been shut o.

• If you are unable to turn the hob o after using it, disconnect it from

the power supply.

• If alphanumeric codes appear on the display when the hob is

switched on, consult the following table for instructions.

Please note: The presence of water, liquid spilled from pots or any objects

resting on any of the hob buttons can accidentally activate or deactivate the

control panel lock function.

MAINTENANCE AND CLEANING

WARNING

• Do not use steam cleaning equipment.

• Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (“H”) is not displayed.

Important:

• Do not use abrasive sponges or scouring pads as they may damage

the glass.

• After each use, clean the hob (when it is cool) to remove any

deposits and stains from food residue.

• Sugar or foods with a high sugar content can damage the hob and

must be immediately removed.

• Salt, sugar and sand could scratch the glass surface.

• Use a soft cloth, absorbent kitchen paper or a special hob cleaner

(follow the Manufacturer’s instructions).

• Spills of liquid in the cooking zones can cause the pots to move or

vibrate.

• After cleaning the hob, dry thoroughly.

If the iXelium ™ logo appears on the glass, the hob has been treated

with iXelium ™ technology, an exclusive Whirlpool finish which ensures

perfect cleaning results, as well as keeping the surface of the hob shiny

for longer.

To clean iXelium ™ hobs, follow these recommendations:

• Use a soft cloth (microbre is best) dampened with water or with

everyday glass cleaning detergent.

• For best results, leave a wet cloth on the glass hob surface for a few

minutes.

Error code Description Possible causes Solution

The control panel switches o because

of excessively high temperatures.

The internal temperature of

electronic parts is too high.

Wait for the hob to cool down before

using it again.

The connection voltage is wrong.

The sensor detects a discrepancy

between the appliance voltage and

that of the mains supply.

Disconnect the hob from the mains

and check the electrical connection.

Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply.

If the problem persists, call the service centre and specify the error code that appears on the display.

C81, C82

F02, F04

F01, F06, F12, F13, F25,

F34, F35, F36, F37, F41,

F47, F58, F61, F76

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool SMC 604 F-NE Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool SMC 604 F-NE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info