Bedienungsanleitung Whirlpool solar c (Seite 4 von 4) (Englisch)

303265

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

5019 307 00676

Solar C

Quick Reference Guide

Before using the machine, please also read the instructions for use carefully!

(Subject to technical modifications)

Whirlpool is a registered trademark of Whirlpool USA

Programme selector knob

The drying programme is selected by turning

this knob.

“Start (Pauze) / Départ (Pause)” button

The drying programme is started by pressing

this button. The indicator lamp flashes during

the selection phase and lights up during

drying.

Indicator lamps

Filter

The indicator lamp lights up when the filter

and/or heat exchanger need cleaning.

Clean the filter at the end of every cycle.

Water container

The indicator lamp lights up when the water

container needs to be emptied. The drying

cycle is automatically interrupted. Empty the

container and restart the drying programme.

Empty the water container after every

drying cycle

Clean heat exchanger

The Led lights up after 30 cycles when the

heat exchanger needs to be cleaned. Clean

the heat exchanger. Then for reset the led

indication, turn the programme selector

knob to the vertical position indicated by the

symbol “ ” and press the

“Start (Pauze)

/ Départ (Pause)”

button during 3 seconds

until led switches off.

Time remaining display

Depending on the programme selected, once

the drying cycle has been started, a default

drying time is displayed. The time displayed is

corrected by a few minutes depending on the

volume, type and dampness of the laundry.

The drying time specified is a calculated

value which will be updated during the

drying programme.

The flashing lines indicate that the calculation is

running. The remaining time will be updated.

Overdry protection

The indicator lamp lights up when a humidity

controlled program is selected, to indicate the

working protection function. Function is not

active in time controlled programmes 10’, 20’,

30’, 40’, 60’, 90’ and “ ”.

Programme sequence

Overdry

protection

Drying

Anti-

crease

End

of cycle

Options

Gentle

Reduces drying intensity (recommended for

delicate items).

Rapid

Shortens drying duration (recommended for

thin items of the same size).

Buzzer

Signals/sounds end of drying cycle.

Anti-crease

Prevents laundry from creasing up to 12

hours. Buzzer and Anti-crease cannot be

selected together.

Delayed Start

Delays the start of the drying cycle by 1 to 12

hours. Each time the button is pressed, the

start time is delayed by 1 hour.

Then press the

“Start (Pauze) / Départ

(Pause)”

button to confirm the final selection

and to start the dryer.

The delayed start indicator lamp flashes and

the countdown counts down in 1-hour

intervals. The countdown is indicated by the

indicator lamp above the button flashing.

During the countdown, the drum will turn

from time to time to re-distribute the

laundry. To cancel or change the previously

set time delay, set the programme selector

knob to “ ” or open the door.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool solar c Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool solar c

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info