5019 301 06192
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Push the
“On/Off”
button . The blue light circle
signals that the washer is switched on.
2. Select the
desired programm
by pushing the
corresponding programme button; it is marked by a
blue light.
3. The
temperature
and
spin speed
indicated on the
display can be altered by pressing the
button or the “Variable spin” button.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of option
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Steam Stain Removal” button
• T
cycle in order to help removing stains.
• Selectable for laundry made of cotton and/or
synthetics within temperature range of 40 to
“Steam Sanitization” button
• Eliminates bacteria and helps sanitizing the laundry
• Appropriate for cotton and/or synthetic laundry items
care label within temperature range of 40 to 60°C.
• P
hour
“Prewash” button
• Only for heavily soiled loads (for
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Intensive rinse” button
• More water is added and rinse cyc
• This option is particularly su
soft water or for washing baby linen, and helps people
with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning
to a later time, or if y
• If you select “Rinse hold”, do not leave the laundry
soak for too long.
Note:
The programme stops to “Rinse hold” at the time
the “Rinse hold” symbol on the display lights up. The blue
light under the
“Start/P
button flashes.
T
• P
“Start/P
button ; the programme
will terminate automatically with the final spin cycl
the present wash pr
• If you do not wish to spin the clothes, push the
“Drain/Reset”
button
and then the
“Start/P
button to start the Drain programme.
CONSUMPTION DATA
Pro
Te m e r t u e
(°C)
Load
(kg)
Wa
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
Cotton / Antibacterial 95 8.0 82
**
2.40 2:10
Cotton 60 8.0 77 1.52 2:10
Cotton with “Eco”
***
60 8.0 69 1.36 2:20
Cotton 40 8.0 77 0.85 2:05
Synthetics 60 3.5 48
**
0.95 1:35
Synthetics 40 3.5 44 0 1:20
Daily load 40 6.0 79 0.70 1:00
Quick wash 30 6.0 72 0.35 0:30
Delicates 30 2.5 60 0.45 0:50
W 40 2.0 60 0 0:45
Handwash / Lingerie 40 2.0 45 0.65 0:40
Handwash / Lingerie 30 2.0 45 0.35 0:36
Steam Refresh — 1.0 1.0 0.20 0:10
Consumption values were measured in normalized conditions in compliance with Stane
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type o
*
The time indicated on the display can deviate from the vaons
applicable at that time.
**
Tut.
***
Reference P
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTIO
“
• Every programme has a predefined spin speed.
• P
• If spin speed “0” is selected, the final spinni
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only
The “Start delay” allows to run
consumer’s convenience, for example at night when
electricity is
activating the “Start delay”.
• Select programme, temperature, spin speed and options.
• P
up to 23 hours.
• Press the
“Start/P
button .
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
• The time delay indication disappea
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
“Start/P
button ,
the number of hours preselected can be reduced by
pressing and holding the “Start delay
hour on, the delay time can also be reduced by minutes.
T
..before you press the “Start/P
• Select another programme or press the
“Drain/
Res
button.
..after having pressed the “Start/Pause” button:
• Press the
“Drain/Reset”
button for at least 3 seconds -
the start delay time disa
Open the tap and press the
“Start/P
button .
The blue light under the
“Start/P
button is on.
The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.
Before starting and after end of a programme, the sym
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
You can lock the buttons of the control panel against
improper use (e.g. by children).
• P
simultaneously and
The key symbol on the displa
• T
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in yur Instructions for Use; if
the fault persists, contact our After Sales Service
• Tramme sequence indic
are dark, and the “Door open lights up.
1. Switch the machine off by pushing
“On/Off”
.
2. Close the water tap.
3. Open
4. Leave the door ajar to allow the drum to dry.
1. Press the
“Start/P
button to pause the
programme. The light flashes.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
“Start/P
button again. The new
programme continues at the s
previous programme was interrupted. Do not add
detergent for this programme.
The
“Drain/Reset”
button cancels a progr
the end.
• P
“Drain/Reset”
button for at least 3
seconds. Any exist
door can be opened. Caution! The washing might still
be hot.
START DELAY
PRO
“DOOR OPEN” INDICATION
CHILD LOCK
RED INDICA
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
30106192GB.fm Page 2 Friday, June 6, 2008 9:46 AM
Black process 45.0° 100.0 LPI
