Bedienungsanleitung Whirlpool STU83EEU (Seite 4 von 4) (Englisch)

756824

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.whirlpool.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

TROUBLESHOOTING

Before contacting the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes.

Malfunction

Possible cause

Solution

The tumble

dryer does not

turn on.

The plug is not inserted into the socket.

Insert the plug into the socket.

The plug is faulty. Try to plug another appliance in the same socket. Do not use

connecting electrical devices to the socket, as adapters or extensions.

A power failure occurred. Await the reactivation of the power supply.

The tumble

dryer does not

start.

The door is open.

Close the door.

A time delay for the cycle start was set. For machines equipped with this function: await the end of the delay

set or switch the machine o to reset it. Refer to the section Options.

The button Start/Pause was not pressed to start

the program.

Press the button Start/Pause.

The function Key Lock was enabled (in case of

machines equipped with this option).

Refer to the option section and, if the Key Lock is present, disable it.

Switching the machine o is not enough to disable this option.

The drying

times are very

long.

An appropriate maintenance was not carried

out.

Refer to the section Care & Maintenance and perform the operations

described.

The programme, the time and/or the drying

level set are not suitable for the type and the

amount of load inserted into the dryer.

Refer to the section programmes and options to  nd the programme

and the options most suitable for the type of load.

The garments are too wet. Carry out a washing cycle with higher spin speed to remove as much

water as possible.

The dryer may be overloaded.

Refer to the programme section to check the max. load for each

programme.

Room temperature.

The drying time may be longer if the room temperature falls outside the

14–30°C range.

The programme

did not end.

A power failure occurred might have occurred.

In case of power failure, it is necessary to press the button Start/Pause

to restart the cycle.

Programme

 nishes and

clothes are

damper than

expected.

Small load.

The automatic programme has not sensed the required  nal moisture

and the dryer will complete the programme and stop. If this happens

simply select an additional short period of drying or select extra dry

option if available.

Lights on or  ashing

Water tank The water tank is full. Emtpy the water tank. Refer to the section Care & Maintenance.

Door  lter

and/or bottom

 lter*

Failure of the air  ow necessary for machine

operation.

Clean the door  lter and the bottom one and check whether air

intake is free. Carrying out these operations improperly may cause

damages.

Bottom  lter* The bottom  lter requires cleaning. Clean the bottom  lter. Refer to section Care & Maintanence.

The display

shows "Fault FX

EX"

The machine sensors detected a failure.

Switch the dryer o and unplug it. Open the door immediately and

pull laundry out, to allow the heat to dissipate. Wait for about 15

minutes. Reconnect the dryer to the power supply, load the laundry

and restart the drying cycle. If the problem still occurs, contact

the After-Sales Service Centre and communicate the letters and

digits  ashing on the display.

For instance: F3 and E2.

*Note: some models are self-cleaning and not equipped with bottom  lter. Please refer to the section Care & Maintenance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool STU83EEU Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool STU83EEU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info