Bedienungsanleitung Whirlpool SW8AM2YWR (Seite 5 von 19) (Englisch)

702811

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

2. FUNCTIONS

2.1. ON/STAND BY

This function turns On/Stand-by the refrigerator. To put

the product in Stand-by, press & hold the On/Stand-by

button

for 3 seconds. When the appliance is in

Stand-by, the light inside the refrigerator compartment

does not work. Remember that this operation does not

disconnect the appliance from the power supply. To

switch the appliance On again, simply press the On/

Stand-By button

2.2. SMART DISPLAY*

This optional function can be used to save energy.

Please follow the instructions contained in the Quick

Start Guide to activate/deactivate the function. Two

seconds after activation of the Smart Display, the

display goes off. To adjust the temperature or use other

functions, it is necessary to activate the display by

pressing any button.

After activation of the Smart Display, the display goes

off, except the “

Sense Fresh Control” / “ProFresh”

indicator. If Smart Display is active - to adjust the

temperature or use other functions, it is necessary to

activate the display by pressing any button.

After about 15 seconds without performing any action,

the display goes off again and only the “

Sense Fresh

Control” / “ProFresh” indicator remains visible. When

function is deactivated the normal display is restored.

The Smart Display is automatically disabled after a

power failure. Remember that this function does not

disconnect the appliance from the power supply, but

only reduces the power consumed by external display.

Note: The declared appliance energy consumption

refers to operation with the Smart Display function

activated.

2.3. 6TH SENSE FRESH CONTROL

PROFRESH

This function allows optimum storage conditions

(regarding temperature and humidity) to be quickly

reached inside the appliance. The fan must also be

switched on for it to work properly. The “6th Sense

Fresh Control” / “ProFresh” is activated by default To

activate or deactivate this function – see enclosed

Quick Start Guide.

After a power blackout or exit from Stand-by to normal

mode, the “6th Sense Fresh Control” / “ProFresh” status

resets to default i.e. active.

2.4. DOOR OPEN ALARM

The Alarm icon

lights up blinking and the acoustic

alarm sounds. The alarm is activated when the door

is left open for more than 2 minutes. To disengage the

door alarm close the door, or press once Stop Alarm

button

to mute the acoustic alarm.

2.5. VACATION

This function can be activated to reduce the energy

consumption of the appliance during a period of

absence.

Before activating the feature, all perishable food should

be removed from the refrigeration compartment and

make sure that the door is closed properly, since the

refrigerator will maintain a suitable temperature to

prevent the formation of unpleasant odors (+12°C).

To activate/ deactivate press the Vacation mode button

for 3 seconds. When the function is enabled, the

related symbol will light up and the temperature of the

refrigerator compartment will be set to a higher setpoint

(the temperature display will show the new temperature

setpoint of +12°C).

Changing the temperature setpoint will automatically

deactivate the function.

Attention:

• Incompatibility with the “Fast Cool” function

To guarantee optimal performance, the “Vacation” and

“Fast Cool” functions cannot be used at the same time.

Therefore, if the “Fast Cool” function has been already

engaged, it has to be disengaged first to activate the

“Vacation” function (and vice-versa).

2.6. FAST COOL

The use of this function is recommended when

placing a very high quantity of food in the

refrigerator compartment.

Using Fast Cool

function it is possible to increase

the cooling capacity in the refrigerator compartment.

To maximize the cooling capacity, please keep the fan

switch on.

Attention:

• Incompatibility with the “Vacation” function

To guarantee optimal performance, the “Vacation” and

“Fast Cool” functions cannot be used at the same time.

Therefore, if the “Vacation” function has been already

engaged, it has to be disengaged first to activate the

“Fast Cool” function (and vice-versa).

*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool SW8AM2YWR Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool SW8AM2YWR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info