Bedienungsanleitung Whirlpool TDLR 70230 (Seite 2 von 2) (Englisch)

641522

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

CONSUMPTION DATA

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect

to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the

default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Standard Cotton programme and basis for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

*** After programme and spinning with maximum selectable spin speed, in default programme setting.

Power consumption in off-mode 0.11 W / in left-on mode 0.11 W

- the sensor technology adapts water, energy and programme duration to your wash load.

Programme

Tempe-

rature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

without “Rapid”

Approx. Programme Duration

(hrs : min)

Approx. remaining

moisture content (%)***

without “Rapid” with “Rapid”

1000 rpm 1200 rpm

Mixed 40 3.0 45 0.43 1:00 – 64 60

Cotton 95 7.0 58* 2.00 2:35 2:00

65 55

Cotton 60 7.0 54 1.10 2:35 1:45

Cotton 40 7.0 64 0.90 3:00 1:30

Synthetics 60 3.0 54* 0.89 2:15 0:59

40 36

Synthetics 40 3.0 50 0.56 2:15 0:59

Delicates 40 1.5 50 0.55 0:45 –

Wool 40 1.0 40 0.55 0:35 –

Rapid 30’ 30 3.0 42 0.25 0:30 –

Aqua Eco 40 2.5 19 0.43 1:00 –

Colours 40 4.0 67 0.50 1:20 1:00

Jeans 40 4.0 41 0.58 1:30 1:10

Sport 30 3.0 50 0.45 2:05 1:14

Business 40 1.5 50 0.55 0:45 –

eCotton** 60 7.0 48 0.90 4:00 –

62 44eCotton** 60 3.5 34 0.75 2:50 –

eCotton** 40 3.5 34 0.65 2:50 –

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures.

• Not selectable for Cotton 70 - 95°C.

“Fresh care” button

• Select this option if you cannot unload the laundry

soon after programme end, or if you tend to forget the

laundry in your washing machine. It will help to keep

your laundry fresh.

• The washing machine will start to tumble the laundry

periodically after programme end.

• The light of the “Fresh care” button will blink while this

function is active, and the display will show an animation.

• The periodic tumbling will last up to approximately

6 hours after the end of your wash programme, and

you can stop it at any time by pressing the “Fresh care”

button. It will last a while until you can open the door.

• After the “Fresh care” period has run out, the display

indicates “End”.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for small loads or only lightly soiled

laundry.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular

dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helping people with

allergies.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during the

rinse. The water is drained out only.

START DELAY

The “Start delay” button allows the user to run the

machine at his convenience, for example at night when

electricity is cheaper.

• Select programme, spin speed and options.

• Press the “Start delay” button several times to select a

delay time by 1 to 24 hours.

• Start the countdown of the “Start delay” by pressing

“Start/Pause”. the lamp over the “Start delay” button

blinks, and it goes off when the programme starts.

• Once having pressed the “Start/Pause” button,

the countdown of the time delay begins. The time

delay indication on the display disappears when the

programme starts and is replaced by the remaining

programme time.

• After the “Start/Pause” button has been pressed,

the number of hours preselected can be reduced by

pressing again the “Start delay” button.

To cancel the “Start delay”

..before you press the “Start/Pause” button:

• Turn the programme selector to another position or

press the “Reset/Drain” button.

..after having pressed the “Start/Pause” button:

• Press the “Reset/Drain” button for at least 3 second.

The start delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The

indication lamp next to the “Start/Pause” button lights up.

The display shows the remaining programme time. Due

to variations in load and temperature of inlet water, the

remaining time is newly calculated in certain programme

phases. If this is the case, an animation appears on the

time display.

“LID OPEN” INDICATION

Before starting and after end of a programme, the lamp

lights to show the the lid can be opened. As long as a wash

programme is running, the lid remains locked and must

on no account be forced open. In case you have an urgent

need to open it during a running programme, refer to

“Cancel a running programme before the end”.

PREPARATION OF THE WASH CYCLE

Load the washing machine, close the drum door and

check that it is closed properly.

2. Pour in the detergent and any additives, as described

overleaf and in the instruction manual.

3. Close the lid.

4. Turn the programme selector to the desired

programme. The display shows the duration of the

selected programme (in hours and minutes), and

the indicator for the “Start/Pause” button flashes.

The temperature and spin speed can be changed by

pressing the “Temperature” and “Spin” buttons. If

you do not start the programme soon after having

made your choice, the washing machine will switch

off automatically after about a quarter of an hour.

Switch on the washing machine again by turning the

programme selector back to “O” and then to the

desired programme.

SELECT ANY DESIRED OPTION

When the combination of programme and additional

option(s) is not possible, the indication lights switch off

automatically. Unsuitable combinations of options are

deselected automatically.

“Colours 15° ” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured

laundry.

CHILD LOCK BUTTONS

You can lock the buttons of the control panel against

improper use (e.g. by children).

• Press both of the child lock buttons simultaneously and

hold them for at least 3 seconds. The key symbol on the

display lights up.

• To unlock the buttons again: proceed in the same way.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed” -

No or not sufficient inlet water.

“Service” -

Failure or malfunction of an electrical component.

“Clean pump” -

Waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning

•

PROGRAMME END

The “Lid open” indication lights up and the display shows

“End”. After about a quarter of an hour, the washing

machine will switch off completely to save energy.

1. Turn the programme selector to the “O” position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the interior of

the machine to dry.

DETERGENT OVERDOSAGE INDICATION

The symbol will light up at the end of the programme if

you used too much detergent. use less detergent next

time. If the symbol lights up and the display shows “Fod”,

too much foam interrupted the wash process; refer to the

“Troubleshooting Guide” in your Instructions for use.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

Press the “Start/Pause” button to pause the

programme. The light blinks.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

CANCEL A RUNNING PROGRAMME

BEFORE THE END

The “Reset/Drain” button cancels a programme before

the end.

• Press the “Reset/Drain” button for at least 3 seconds.

The water is drained out; it may last a while until you can

open the lid.

Whirlpool TDLR 70230 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool TDLR 70230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info