Bedienungsanleitung Whirlpool WBC3C34PX (Seite 4 von 8) (Englisch)

757382

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

NaturalDry

NaturalDry is a convection drying system which automatically opens

the door during/after drying phase to ensure exceptional drying

performance every day. Door opens at the temperature that is safe to

your kitchen furniture.

As additional steam protection, special designed protection foil is added

together with the dishwasher (depending on the model type - can be

the need to buy it). To see how to mount protection foil please refer to

(INSTALLATION GUIDE).

NaturalDry functionality could be disabled by the user as follows:

• To DISABLE: Switch On, then switch O. Keep the P button pressed for

5 sec., at the end of 5 sec the dishwasher plays a short beep. Switch

On the machine, the display shows „oOF”.

• To ENABLE: Switch On, then switch O the machine. Keep the P button

pressed for 5 sec., at the end of 5 sec the dishwasher plays a short beep.

Switch On the machine, the display shows „oOn”.

MULTIZONE

If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and detergent.

Select the program and then press the MULTIZONE button:

the indicator over the button lights up and the symbol of

the chosen rack will appear on the display. By default the

appliance washes dishes in all racks.

To wash only the specic rack, press this button repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (option is OFF and the appliance will

wash dishes in all racks).

Remember to load the upper or lower rack only, and to

reduce the amount of detergent accordingly.

If upper rack is removed, please apply detergent directly

to tub instead of detergent dispenser.

KEYLOCK

A long press (for 3 seconds) of MULTIZONE button, will activate

the KEYLOCK function. The KEYLOCK function will block

the control panel except the ON/OFF button.

To deactivate the KEYLOCK, long press again.

POWER CLEAN®

Thanks to the additional power jets this option provides

a more intensive and powerful wash in the lower rack, in the

specic area. This option is recommended for washing pots

and casseroles. Press this button to activate POWER CLEAN®

(the indicator lights up).

TABLET

This setting allows you to optimize the performance

of the program according to the type of detergent used.

A long press (for 3 seconds) of the POWER CLEAN® button,

will activate the function (the corresponding symbol will

light up) if you use combined detergents in tablet form

(rinse aid, salt and detergent in 1 dose).

If you use powder or liquid detergent, this option should

be o.

DELAY

The start of the program may be delayed for a period of

time between 0:30 and 24 hours.

1. Select the program and any desired options. Press the

DELAY button (repeatedly) to delay the start of the

program. Adjustable from 0:30 to 24 hours. With each

press of the button, the delay start increases by: 0:30

if selection below 4 hours, 1:00 if selection is below 12

hours, 4 hours if selection is above 12 hours. If 24 hours

reached, and the button is pressed, the delayed start is

deactivated.

2. Press the START/PAUSE button: the timer will begin

counting down;

3. Once this time has elapsed, the indicator light switches o

and the program begins automatically.

If at the time of the countdown the START/PAUSE button

is pressed again the DELAY option is cancelled and the

selected program starts automatically.

The Delay function cannot be set once a wash cycle has

been started.

WATER TAP CLOSED – Alarm

Flashes when there is no inlet water or water tap is closed.

DRAIN OUT

To stop and cancel the active cycle, the Drain Out function

can be used.

A long press of START/PAUSE button, will activate the DRAIN

OUT function. The active program will be stopped and the

water in the dishwasher will be drained out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool WBC3C34PX Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool WBC3C34PX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info