Bedienungsanleitung Whirlpool WCIC3C26PE (Seite 4 von 8) (Englisch)

756928

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly

3 times and beeps will sound. The option will not be enabled.

DELAY

The start time of the program may be delayed for a period of

time between 1 and 12 hours.

1. Press the DELAY button: the corresponding symbol appears

on the display; each time you press the button, the time (1h,

2h, etc. up to max. 12h) from the start of the selected wash

cycle will be increased

2. Select the wash program and close the door: the timer will

begin counting down;

3. Once this time has elapsed, the indicator light switches o

and the wash cycle begins.

To adjust the delay time and select a shorter period of time,

press the DELAY button. To cancel it, press the button repeatedly

until the selected delayed start indicator light switches o.

The wash program will start automatically as soon as the door

is shut.

The Delay function cannot be set once a wash cycle

has been started.

MULTIZONE

If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and detergent.

Select the program and then press the MULTIZONE button: the

symbol of the chosen rack will appear on the display. By default

the appliance washes dishes in all racks.

To wash only the specic rack, press this button

repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (option is OFF and the appliance will

wash dishes in all racks).

Remember to load the upper or lower rack only, and

to reduce the amount of detergent accordingly.

TURBO

This option can be used to reduce the duration of the

main programs while maintaining the same washing and

drying performance levels.

After selecting the program, press the TURBO button and the

indicator light will switch on. To deselect the option, press the

same button again.

POWER CLEAN®

Thanks to the additional power jets this option provides

a more intensive and powerful wash in the lower rack, in

the specic area. This option is recommended for

washing pots and casseroles. Press this button to activate

POWER CLEAN® (the indicator lights up).

TABLET

This setting allows you to optimize the performance of

the program according to the type of detergent used.

Press the TABLET button (the indicator light will switch on) if

you use combined detergents in tablet form (rinse aid, salt

and detergent in 1 dose).

If you use powder or liquid detergent, this option should

be o.

OPERATION INDICATOR

A LED light projected on the oor indicates that the dis-

hwasher is working. One of the following operating modes

can be selected:

a. Disabled function.

b. When the cycle starts the light goes on for few seconds,

stays o during the cycle and ashes at the end of the

cycle.

c. The light stays on during the cycle and ashes at the end

of the cycle (default mode).

If the delayed start was set, the light goes on either for the rst

few seconds or the entire duration of the countdown, based on

whether mode b) or c) was set.

The light goes o every time the door is opened. To select the

mode you prefer, switch on the machine, hold down button P

until one of the three letters appears on the

display, press button P until you reach the desired letter (or

mode), hold down button P to conrm the selection.

Note: If NaturalDry is active and it opens the door, then

OPERATION INDICATOR will not ash at the end of cycle

NaturalDry

NaturalDry is a convection drying system which automatically opens

the door during/after drying phase to ensure exceptional drying per-

formance every day. Door opens at the temperature that is safe to your

kitchen furniture, thus door will not be opened when the option of

POWER CLEAN® or TURBO are on.

As additional steam protection, special designed protection foil is ad-

ded together with the dishwasher. To see how to mount protection foil

please refer to (INSTALLATION GUIDE).

NaturalDry functionality could be disabled by the user as follows:

1. Go to the Dishwasher software menu pressing and holding P

button (6 sec).

2. You are currently in Light Control Menu (please refer to OPERA-

TION INDICATOR description), if you don’t want to change anything

please press and hold P button (until one of the two letters appears

on the display).

3. You switched to NaturalDry Control Menu, you could change sta-

tus of NaturalDry functionality by pressing P button:

E – enabled d – disabled

To conrm the change and exit from the Control Menu please press

and hold P button (3 sec).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool WCIC3C26PE Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool WCIC3C26PE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info