Bedienungsanleitung Whirlpool WH1410 (Seite 4 von 8) (Englisch)

702789

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

INSTRUCTIONS FOR USE

• Do not use mechanical devices or any means other than

those recommended by the manufacturer to speed up

the defrosting process.

• Do not use electrical appliances inside it, unless they are

of the type recommended by the manufacturer.

• This appliance is not intended for use by people

(including children) with limited physical, sensory

or mental abilities or without experience and

knowledge of it, unless they are supervised or

instructed in its use by a person responsible for

their safety.

• To prevent the risk of children becoming trapped

and suocating, do not let them play or hide inside

the appliance.

• The power cable must only be replaced by an

authorised person.

• Do not use extension leads or multi‑adapters.

• It must be possible to disconnect the power supply

by unplugging or by means of a double‑pole mains

switch installed ahead of the socket.

• Make sure the voltage specied on dataplate

matches the voltage in your home.

• Do not swallow the liquid (non‑toxic) contained in

the ice packs (if provided).

• Limit the number of times the appliance door is

opened.

DEFROSTING THE APPLIANCE

The appliance should be defrosted when the thickness of

ice on the walls reaches 5‑6 mm.

• Disconnect the appliance from the mains power supply.

• Remove the packs of food from the appliance and wrap

them close together in newspaper and store in a very

cool place or thermally insulated bag.

• Leave the appliance lid open.

• Remove the internal defrost

water drain plug (depending

on model).

• Remove the external defrost

water drain plug (depending

on model) and reposition it as

shown in the gure.

• Place a bowl beneath the

drainage channel to collect

the residual water. If available,

use the divider.

• Speed up defrosting by using

a spatula to detach the ice

from the appliance walls.

• Remove the ice from the bottom of the appliance.

• In order to avoid permanent damage to the

appliance interior, do not use pointed or sharp

metal instruments for removing the ice.

• Do not use abrasive products or heat up the interior

articially.

• Dry the interior of the appliance thoroughly.

• On completion of the defrosting, ret the plug.

CARE AND MAINTENANCE

• Remove the ice from the upper edge (see the

Troubleshooting Guide).

• Clean the inside after defrosting, using a sponge

dampened with warm water and/or mild detergent.

• Clean the side motor cooling grille (depending on model).

• Remove dust from the condenser on the rear of the

appliance.

Before carrying out maintenance, unplug the

appliance. Do not use abrasive products, scourers

or stain‑removers (e.g. acetone, trichloroethylene) to

clean the appliance.

To obtain the best results from your appliance, carry

out cleaning and maintenance at least once a year.

CHANGING THE LID LIGHT BULB (if provided)

• Disconnect the appliance from the

mains power supply.

• Remove the diuser by following

the sequence of steps shown in

the gure.

• Unscrew the light bulb and replace

it with an identical bulb of the same

wattage and voltage.

• Ret the diuser and plug in the appliance.

TROUBLESHOOTING GUIDE

1. The red LED ashes.

• Is there a power failure?

• Is a defrosting operation in progress?

• Has fresh food recently been introduced?

• Is the appliance lid properly closed?

• Is the appliance placed near a heat source?

• Are the ventilation grille and condenser clean?

2. All LEDs ash at the same time.

• Contact the After‑Sales Service.

3. The appliance is too noisy.

• Is the appliance perfectly horizontal?

• Is the appliance in contact with other furniture or objects

that may cause vibrations?

• Has the packaging been removed from under the

appliance?

Note:

Gurgling noises from the refrigerating circuit after the

compressor cuts out are perfectly normal.

4. All LEDs are o and the product is not working.

• Is there a power failure?

• Is the plug properly inserted in the socket?

• Is the electric cable intact?

5. All LEDs are o and the product is working.

• Contact the After‑Sales Service.

6. The compressor runs continuously.

• Have hot foods been put in the appliance?

• Has the appliance lid been left open for a long time?

• Is the appliance placed in a very warm room or near heat

sources?

• Has the fast freeze function been activated? (The green

LEDs ash alternatively)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool WH1410 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool WH1410

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info