Bedienungsanleitung Whirlpool WHE22333 (Seite 3 von 5) (Englisch)

587327

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

• Donotuseextensionleadsoradapters.

• Electricaldisconnectionmustbepossibleeitherby

unpluggingtheapplianceorbymeansofadouble-

poleswitchlocateduplinefromthesocket.

• Ensurethatthevoltageindicatedontheappliance

data plate corresponds to the domestic supply

voltage.

• Donotingestthecontents(non-toxic)oftheice

packs(ifprovided).

• Restrictthenumberoftimesyouopenthedoor.

• Thisappliancefeatures“skincondenser”

technology: the condensing unit is integrated into

thewallsofthefreezer.Forthisreasonthesideand

front walls of the product may become hot while

the product is running. This is entirely normal and

alsoreducestheriskofcondensationformingin

particularly critical environmental conditions (see

paragraph“Troubleshootingguide”).

APPLIANCE DEFROSTING

The appliance should be defrosted when the thickness of

ice on the walls reaches 5-6 mm.

• Disconnect the appliance from the power supply.

• Remove food from the appliance and put it in a very cool

place or a thermally insulated bag.

• Leave the appliance door open.

• Remove the internal defrost water drain plug (depending

on model) (Fig. 8).

• Remove the external defrost water drain plug (depending

on model) and reposition it as shown in Fig. 8.

• Use the separator (depending on model) inside the

product as a recipient for any remaining water, (D) as

shown in Fig. 8. If there is no separator, use a shallow

container.

• Defrosting can be sped up by using a spatula to detach

the frost from the appliance walls.

• Remove the frost from the bottom of the appliance.

• In order to avoid permanent damage to the

applianceinterior,donotusepointedorsharp

metal instruments to remove the ice.

• Donotuseabrasiveproductsorheatuptheinterior

articially.

• Drytheinsideoftheappliancethoroughly.

• Ret the plug after defrosting.

CLEANING AND MAINTENANCE

• Remove the frost from the upper edges (see

Troubleshooting Guide).

• Clean the inside after defrosting, using a sponge

dampened with warm water and/or mild detergent.

• Clean the side vent (if provided).

Unplug the appliance before carrying out maintenance

operations.Donotuseabrasiveproducts,scourers

orstain-removers(e.g.acetone,trichloroethylene)to

clean the appliance.

Toobtainthebestresultsfromyourappliance,carry

out cleaning and maintenance at least once a year.

CHANGING THE LID LIGHT BULB (if provided)

• Disconnect the appliance from the mains power supply.

• Remove the diuser by following the sequence of steps

shown in the gure.

• Unscrew the light bulb and replace it with an identical

bulb of the same wattage and voltage.

• Ret the diuser and plug in the appliance.

TROUBLESHOOTING GUIDE

1.TheredLEDashes.

• Is there a power failure?

• Is a defrosting operation in progress?

• Has fresh food recently been introduced?

• Is the appliance lid properly closed?

• Is the appliance placed near a heat source?

• Are the ventilation grille and condenser clean?

2.AllLEDsashatthesametime.

• Contact the After-Sales Service.

3. The appliance is too noisy.

• Is the appliance perfectly horizontal?

• Is the appliance in contact with other furniture or

objects that may cause vibrations?

• Has the packaging been removed from under the

appliance?

Note: Gurgling noises from the refrigerating circuit after the

compressor cuts out are perfectly normal.

4.AllLEDsareoandtheproductisnotworking.

• Is there a power failure?

• Is the plug properly inserted in the socket?

• Is the electric cable intact?

5.AllLEDsareoandtheproductisworking.

• Contact the After-Sales Service.

6. The compressor runs continuously.

• Have hot foods been put in the appliance?

• Has the appliance lid been left open for a long time?

• Is the appliance placed in a very warm room or near

heat sources?

• Has the fast freeze function been activated? (the

green LEDS ash alternatively)

7. Too much ice on the upper edge.

• Are the defrost water drainage plugs correctly

positioned?

• Is the appliance lid properly closed?

• Is the appliance lid seal damaged or deformed?

(See chapter “Installation”)

• Have the 4 protection pieces been removed?

(See chapter “Installation”)

8. Formation of condensate on the external walls of

the appliance.

• It is normal for condensation to form under certain

atmospheric conditions (humidity above 85%) or if the

appliance is located in a damp or poorly ventilated

room. The performance of the appliance is in no way

aected.

9. The layer of ice on the internal walls of the

appliance is not uniform.

• This phenomenon is quite normal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool WHE22333 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool WHE22333

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info