15
T1. FAN MOTOR OFF / DECREASE SPEED
Press to decrease speed and switch the extraction motor OFF.
Press and hold to directly switch the extraction motor OFF.
T2. FAN MOTOR ON / INCREASE SPEED
Press to switch the extraction motor ON and increase speed.
Press and hold to set 5th speed directly.
Please note: 4th and 5th speed last for 5 mins. Then the hood go back to 3rd speed.
T3. GREASE/CHARCOAL FILTER ALARM/RESET
At regular intervals, the hood signals the need to perform filter maintenance.
Please note: The indicators will only work when the hood is on.
T3 lit: Carry out maintenance on the grease filter.
T3 flashing: carry out maintenance of the charcoal filter.
Resetting the filter saturation indicators:
Please note: This must be done with the hood switched on.
Press and hold T3.
The reset of the Grease Filter and Charcoal Filter is performed using the same key. If both filters alarms are active, the reset
procedure will reset the counter one by one, with priority to the Charcoal.
Activating the carbon filter saturation indicator
Please note: This must be done with the extraction motor switched off.
This indicator is usually deactivated – press and hold T6 and T7 simultaneously to activate the function: both will light up to indicate
activation.
To deactivate the function, press and hold the same buttons again: Both will flash briefly and then switch off to indicate deactivation.
T4. 6TH SENSE FUNCTION (AUTO MODE) ON/OFF
The hood set the extraction speed automatically if the sensor in the hood detects changing on ambient conditions.
Please note: to make sure this function is used correctly first configure sensor (see “Sensor set up” below).
Please note: if you change any other functions that control the speed, the “6th sense” function will switch off.
Sensor set up
This can be done when the hood is OFF.
In normal ambient conditions press T4 for 5secs, T4 flashes for 5 mins to indicate hood is performing sensor calibration, then
switches off to indicate the calibration has ended.
Setting cooktop: Press and hold T1 and T2 simultaneously. Both lit to indicate hood is ready to accept cooktop parameter
calibration.
Press T1 to choose Gas hob (T1 starts to flash for 3 secs to indicate hood parameters are set for gas hob).
Press T2 to choose Induction hob (T2 starts to flash for 3 secs to indicate hood parameters are set for induction hob).
T5. NIGHT LIGHT (AMBIENT LIGHT)
Press to switch the soft background lighting on or off.
T6. MAIN LIGHT OFF / DECREASE INTENSITY
Press to decrease intensity and to switch OFF light.
Press and hold to directly switch OFF.
T7. MAIN LIGHT ON / INCREASE INTENSITY
Press to switch ON and to increase light intensity.
Press and hold to directly switch ON.
