Bedienungsanleitung Whirlpool WQ9B2L (Seite 7 von 675) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

702793

Zoom out

Zoom in

Vorherige Seite

1/675

Nächste Seite

Electrical Requirements

IMPORTANT: Installation and electrical connection must

be carried out by a qualied technician according to the

manufacturer’s instructions and in compliance with the local

safety regulations.

■The refrigerator is designed to operate on a separate

220-240 V, 10 A, 50-60 Hz circuit.

■Make sure the voltage specied on the rating plate

corresponds to that of your home.

■It must be possible to disconnect the appliance from the

power supply by unplugging it or by means of a main two pole

switch installed upstream of the socket.

■If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualied persons in

order to avoid a hazard.

Before you move your refrigerator into its nal location, it is

important to make sure you have the proper electrical connection:

Recommended Earthing Method

220-240 V 50 Hz, 220 V 60 Hz, or 230/240 V 50 Hz AC only 10 A

fused and earthed electrical supply is required.

For Australia and New Zealand:

Your new appliance has been especially manufactured to meet all

Australian Standards and Conditions.

Some notations in the installation instructions may refer to

electrical requirements in other countries, so we draw your

particular attention to these specic notes.

Your appliance needs to be plugged into a 230/240 V 50 Hz AC

only 10 A earthed socket.

Electrical Requirements (Great Britain and Ireland only)

IMPORTANT: This refrigerator must be earthed.

Fuse Replacement

If the main lead of this refrigerator is tted with a BS1363A,

13 A fused plug, to replace a fuse in this type plug use an A.S.T.A.

approved fuse to BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13 A fuse into the fuse cover.

3. Reinsert both the fuse and its cover into the plug.

IMPORTANT: The fuse cover must be retted when changing a

fuse. If fuse cover is lost, the plug must not be used until a correct

replacement cover is tted. A correct replacement is identied by

the colour insert or colour “word” embossed on the base of the

plug. Replacement fuse covers are available at your local

electrical shop.

For the Republic of Ireland (only):

The information given in respect of Great Britain will frequently

apply, but a third type of plug and socket is also used, the 2-pin,

side earth type.

Socket/Plug (valid for both countries):

If the tted plug is not suitable for your socket, please contact

After-sales Service for further instruction. Please do not

attempt to change the plug yourself. This procedure needs

to be carried out by a qualied technician in compliance with

the manufacturer’s instructions and current standard safety

regulations.

WARNING

Electrical Shock Hazard

Plug into a grounded (earthed) outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Type B Type E and F

Type I Type M Type G

A. Fuse cover

B. Fuse

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool WQ9B2L Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info