615142
8
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
P8 – 30 minute fixed time ‘airing’ program; useful for freshening up clothing. This program operates without the
heater, circulating air through the dryer at the ambient temperature.
P9 – Variable Time program – can be set from 10 min. to 180 min. drying time and can be operated on the full
heat, half heat or cool setting. To return from a time program to the main menu, press the Reset button.
All programs from P1 to P9 can be used with the Delay Start feature. A maximum of 9 hours delay time is
available in 1 hour increments.
The anti-crease function can be selected to minimize creasing by continuing to turn the drum periodically after the
main drying cycle has finished.
The standard cotton programme is suitable to dry normal wet cotton laundry. It is the most efficient programme in
terms of energy consumption for drying wet cotton laundry.
Your appliance is a reversing, small door opening dryer. A full load will typically take 129 minutes and will use
approximately 2.51kWh of energy. A half load will typically take 76 minutes and will use approximately 1.48 kWh
of energy.
The power consumption of the off-mode and the left-on mode is zero.
SECTION 5: DRYING YOUR LAUNDRY
* Before Drying - Check care labels inside the garments
CARE LABELS YOU MAY FIND ON YOUR FABRICS
* Drying
When starting the dryer for the first time, or starting after temporary disconnection from the gas supply, air in the
pipes will prevent ignition. To clear this air, the dryer must be operated by selecting extra dry and pressing
Activate and Start. Allow the dryer to operate for 1/2 minute before stopping the dryer. Repeat this process until
continuous burning of the gas is indicated by the neon light on the control panel. (The light will go out when in
reverse tumble).
OPERATION
Open the door.
Load clothes loosely into the drum. Load sheets first, starting with one corner. –
The appliance is not to be operated without the lint filter in place
Close the door.
Dry your hands.
Plug in the machine and press the Activate button. The Display Window will illuminate. If no further buttons are
pressed, the display will go into sleep mode after 1 minute. To reactivate, press the Activate button.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für White Knight LPG86A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info