Bedienungsanleitung Whynter ARC-148MHP (Seite 9 von 19) (Englisch)

727502

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

INSTALLATION

WARNING: NEVER OPERATE THE AIR CONDITIONER

WITHOUT THE AIR FILTER

AIR FILTERS

• Silvershield Pre-filter

This portable air conditioner is equipped with a

Silvershield pre-filter, which removes large particles such as

dust, pet hair and dander. This pre-filter can be removed for

cleaning by pulling the filter frame back and out. This pre-filter

washable and does not need to be replaced.

• 3M™ Antimicrobial High Air Flow Filter

This portable air conditioner comes with the 3M™ Antimicrobial

High Air Flow Filter which is designed to remove particles such

as dust, pet hair and dander, antimicrobial agent helps inhibit

the growth of mold and mildew, and the micro-structured elec-

trostatically charged filtration media traps and retains particles.

The 3M Filter is pre-installed.

Note: The 3M Filter should be replaced every 2-3 months de-

pending on usage. Please contact support@whynter.com for

retail sales information.

WATER DRAINAGE

The dehumidifying capacity of this unit is 71 pints per day. The patented self-evaporating function of the

ARC-148MHP unit fully exhausts all condensation automatically in most environments when humidity is less than

70%. Areas with more than 70% humidity, the self-evaporating function can still exhaust about 98% of the

moisture and the remaining 2% of moisture will be collected in the water tank of the air conditioner.

When the water reservoir reaches its maximum level, the unit will beep 8 times and the digital display will show

P1. When the unit displays P1, all operation modes will be disabled temporarily, while the fan continuously run-

ning. The P1 code will disappear when the water is completely drained.

• Manual drainage (Fig. 1a)

In AUTO, COOL, DRY, or HEAT mode, carefully move the unit to a drain location or position a flat container,

dish or optional drain bucket accessory (sold separately) under the drain area of the lower drain port. Remove

the bottom drain plug and let the water drain. Replace the drain plug and plug in to resume operation.

• Continuous drainage (Fig. 1b)

In AUTO, COOL or DRY mode, remove the upper drain plug from the back of the unit and install the drain hose.

Place the open end of the hose to a drain area. This method is recommended if uninterrupted operation is de-

sired.

• Heat pump drainage (Fig. 1c)

This unit has a condensate pump feature that can pump out (and up) water through the included drain hose for

continuous water removal during HEAT Mode. Remove the heat pump drain plug from the back of the unit and

install the drain hose. Place the open end of the hose to a drain area.

NOTE: The condensate pump will only engage during Heat mode and will not work in any other modes.

Bottom drain

plug for Manual

Drainage

Silvershield Filter

3M Filter

Attach drain

hose for con-

tinuous water

removal during

Heat Mode

Fig. 1a Fig. 1b Fig. 1c

Attach drain

hose for

continuous

water re-

moval dur-

ing Cool or

Dry Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whynter ARC-148MHP Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info