Bedienungsanleitung Whynter RPD-501WP (Seite 8 von 19) (Englisch)

727518

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

PARTS AND CONTROLS

Energy Saver

When the unit is running on normal operation, once the RH% is reached, the fan will still run continuously to avoid

high start-up amperage which makes the unit energy-efficient . Please note that the fan may run continuously or

shut off intermittently depending on the RH% and set humidity.

7. Timer Button

Press to activate the Timer delay feature, in conjunction with the Down and Up Buttons.

 Timer Delay Switch Off

When the appliance is ON, press the Timer button to activate Auto-stop function and the Timer OFF

light will come on. Set the desired time delay OFF hours by pressing the UP and DOWN buttons. The

time increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance switch-

es off. To cancel the delayed switch off function, set the time to “00” or turn off the appliance.

 Timer Delay Switch On

When the appliance is OFF, press the Timer button to activate Auto-start function and Timer ON light

will come on. Set the desired time delay ON hours by pressing the UP and DOWN buttons. The time

increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance turns on. To

cancel the delayed switch on function, set the time to “00” or turn off the appliance.

 Timer Delay Switch On and Off Sequence

When the appliance is OFF, press the Timer button to activate Auto-start function and Timer light ON

will come on. Set the desired time delay ON hours by pressing the UP and DOWN buttons. Once Timer

Delay Switch On is placed, press the Timer button again to activate Auto-stop function and the Timer

OFF light will come on. Set the desired time delay OFF hours by pressing the UP and DOWN buttons.

When the delay time set has elapsed, the appliance switches off. To cancel the delayed switch off func-

tion, set the time to “00” or turn off the appliance.

Bucket Full Indicator

The appliance will run continuously until the set RH% is reached or when the drain bucket is full. When the drain

bucket is full, the Full indicator light will illuminate and the dehumidifier will stop operating. Remove the water in the

bucket with two hands, then place the drain bucket back to it's proper position and the machine will start operating

again.

NOTE: The Full Indicator light will be off even if the water is full in Water Pump Drain Method. See page 13.

Auto Defrost Indicator

In the event frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run

until the frost is evaporated. This happens when the appliance is operating in low temperatures (less than 53°F or

12°C), which affects the efficiency of the dehumidifier. When this happens, the Auto Defrost light will turn on and

the machine will go into periodic defrost mode automatically. Defrost time may vary. If the dehumidifier freezes up,

turn the appliance off for few hours and then restart. The appliance will not operate satisfactorily if the room tem-

perature is below 41°F

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whynter RPD-501WP Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info