Bedienungsanleitung Wilfa Lofoten Powerful (Seite 20 von 154) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

774434

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

INSTRUCTION MANUAL · AIR CONDITIONER

u QUIET button

Press this button, the Quiet status is under the Auto Quiet mode (display “ “

and “Auto” signal) and Quiet mode (display “ “ singal) and Quiet OFF (there

is no signal of “ “ displayed), after powered on, the Quiet OFF is defaulted.

Under the Quiet mode (Display “ “ signal). The Quiet function is only available

for some models.

i SLEEP button

Press this button, can select Sleep 1 ( ), Sleep 2 ( ), Sleep 3 ( ) and cancel

the Sleep, circulate between these, after electried, Sleep Cancel is defaulted.

Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for

one hour, the main unit setting temperature will increase 1°C, 2 hours, setting

temperature increased 2°C, the unit will run at this setting temperature; In Heat

mode: sleep status after run for one hour, the setting temperature will decrease

1°C, 2 hours, setting temperature will decrease 2°C, then the unit will run at this

setting temperature.

Sleep 2 is sleep mode 2, that is air conditioner will run according to the

presetting a group of sleep temperature curve. In Cool mode:

1. When setting the initial temperature 16°C-23°C, after turned on Sleep

function, the temperature will be increased 1°C in every hour, after 3°C

the temperature will be maintained, after 7hours, the temperature will be

decreased 1°C, after that the unit will keep on running under this temperature;

2. When setting the initial temperature 24°C-27°C, after turned on Sleep

function, the temperature will be increased 1°C in every hour, after 2°C

the temperature will be maintained, after 7hours, the temperature will be

decreased 1°C, after that the unit will keep on running under this temperature;

3. When setting the initial temperature 28°C-29°C, after turned on Sleep

function, the temperature will be increased 1°C in every hour, after 1°C

the temperature will be maintained, after 7hours, the temperature will be

decreased 1°C, after that the unit will keep on running under this temperature;

4. When setting the initial temperature 30°C, under this temperature setting,

after 7hours, the temperature will be decreased 1°C, after that the unit will

keep on running under this temperature;

In Heat mode:

1. Under the initial presetting temperature 16°C, it will run under this setting

temperature all along.

2. Under the initial presetting temperature17°C-20°C, after Sleep function

started up, the temperature will decrease 1°C in every hour, after 1°C

decreased, this temperature will be maintained.

3. Under the initial presetting temperature 21°C-27°C, after Sleep function

started up, the temperature will decrease 1°C in every hour, after 2°C

decreased, this temperature will be maintained.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wilfa Lofoten Powerful Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info