Bedienungsanleitung Wilfa WKD-2200S - until 2020 (Seite 15 von 17) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

774415

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Special Safety Instructions for the Kettle

• Use only cold water when ﬁlling the device.

• The water level must be between the MAX. and MIN. marks.

• Switch the kettle off before removing it from the base.

• Always ensure that the lid is tightly closed.

• The base and exterior of the kettle must not become wet.

• Kettle body used must match with the kettle base.

First Use of the Kettle

Before using the kettle for the ﬁrst time, ﬁll the kettle with cold water and boiled

it twice without any additives.

Fill the kettle with water. Do not overﬁll. Use the water level indicator.

Place the kettle on the base.

• Press the “ ” key shortly, with the sound “Di.”, it starts running. After the

water boils, indicator turns off and the buzzer sends out a sound “Di” at the

same time.

• Press “ ”for 3 seconds, with the buzzer sends out “Di”sound, it starts run-

ning the function of heat insulation. The LED light will be shinning with red

light, while after the water boils, the kettle will keep the water temperature for

2 hours with the indicator light shinning. During the 2 hours heat insulation

function running, it will go on heating when the temperature arrives at 85°C.

• Press “ ”for once, the indicator light of 60°C shines, with the green LED

light. It means that it will stop heating when the water temperature is 60°C.

• Press “ ” for twice, the indicator light of 70°C shines, with the blue LED

light. It means that it will stop heating when the water temperature is 70°C.

• Press “ ”for 3 times, the indicator light of 80°C shines, with the orange

LED light. It means that it will stop heating when the water temperature is

80°C.

• Press “ ”for 4 times we can see the indicator light of 90°C shines, with the

purple LED light. It means that it will stop heating when the water tempera-

ture is 90°C.

After boiling, the kettle switches off automatically.

Disconnect the kettle from the mains electricity supply.

Do not open the lid when pouring.

If the kettle is overﬁlled, boiling water may be ejected.

The kettle is only to be used with the stand provided.

English

EngelskEngelskEnglish

29 30

with liquid. Do not handle the kettle with wet

or moist hands. Should the kettle become wet

or moist, remove the main plug from the socket

immediately.

• DO NOT touch the contents of the kettle.

• Use the kettle only for its intended purpose.

• The kettle is only to be used with the stand

provided.

• If the kettle is overﬁlled, boiling water may be

ejected.

• If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent

or similarly qualiﬁed persons in order to avoid a

hazard.

• Is there damage to the device or that it does

not work, it must be serviced only by authorized

personnel.

• Before connecting the kettle, check whether the

voltage indicated on the appliance, is the same as

the voltage in your home.

1 2

Light

Off

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wilfa WKD-2200S - until 2020 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info