Bedienungsanleitung Wilier Triestina bike (Seite 52 von 58) (Englisch)

780283

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Check frequency Item Description: Check: Note:

Monthly

Brake cables Intact structure

Check the brake cables for any signs of wear,

failure, rust or broken strands. Should you notice signs of wear,

breakage or loose cables that might

affect the brakes operation, have

them ﬁxed or replaced by a qualiﬁed

mechanic.

Brake pads Intact structure

Make sure the brake pads are in perfect condi-

tion. On the friction surfaces of the brake

pads you will ﬁnd some relatively

shallow grooves: for direct-pull

brakes, if the depth of one of these

groves is lower than 2 mm or 1 mm

have the pads replaced.

Brake pins Assembly

Check the brake pins for secure tightening (fork,

seat stays, pad, arm. Should you notice loose pins, use

a torque wrench to check the

tightening torque of the ﬁxing

screws, comparing it with the one

speciﬁed in the manual of the brakes

manufacturer.

Chain Adjustment Make sure the chain's tension is correct. If the chain is loose, have it ﬁxed by a

qualiﬁed mechanic.

Wheels Adjustment Make sure the wheels spin correctly, without any

backlashes. Should you notice any abnormality,

have the bearings of the wheels

adjusted by a qualiﬁed mechanic.

Rims Intact structure

Make sure the rims of the wheels are perfectly

round, undamaged and clean. The wheels

should not present any wobbles. The bicycle

rims with single pivot side-pull caliper brakes

are subjected to constant wear and tear. Dirty

or greasy rims might affect the performance of

the brakes.

Some of the rims on the market

come with a wear indicator that

becomes visible once the friction

surface wears out. You should

replace the rim if you can see the in-

dicator. Not replacing the rim might

result in breakage of the same,

with subsequent loss of control and

falling. Keep the rims clean using a

dampened cloth. Should you notice

any deteriorated rims, have them

replaced by a qualiﬁed mechanic.

Check frequency Item Description: Check: Note:

Every 3 months

Mechanical

parts Cleaning

Clean and polish the mechanical parts. This way

you can check them for any structural issues.

The components will work at full performance

only if thoroughly cleaned.

Pedals and toe

clips and toe

straps

Perfect condition

and adjustment

Make sure the pedals and toe clips/straps work

properly and are in perfect condition. Make sure

they are securely fastened.

Should you notice signs of damage or

deterioration. have the pedals or toe

clips/straps replaced by a qualiﬁed

mechanic.

Crank arm Adjustment

Check the crank arm for any backlashes and

make sure it is not loose. Should you notice backlashes or

signs of loosening, have the crank

arm adjusted referring to the manual

provided by its manufacturer.

Brake levers Perfect condition

and lubrication

Make sure the brake levers are in perfect condi-

tion and have no chips, breaks or cracks. Lubri-

cate them for optimal performance.

Should you notice signs of deterio-

ration, have them replaced. Use only

recommended lubricants when ser-

vicing the brake levers.

WILIER.COM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wilier Triestina bike Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info