Bedienungsanleitung Witter ZX203 (Seite 1 von 8) (Englisch)

807263

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

13mm x 1 +

10mm x 2

8mm x 1

Tools required for initial assembly:

ASSEMBLY AND USER INSTRUCTIONS v1a

3 x

Whenever this product is used the following information must be taken

into consideration:

The cycle carrier is a safe product IF used correctly, whereas if it is used

incorrectly it can cause damage to you, your vehicle and anyone driving

behind you.

UK - Models

EU - Models

CYCLE CARRIER SYSTEMS

ASSEMBLY AND USER INSTRUCTIONS v1a

ZX203 Cycle Carrier

Rear cycle carrier for

mounting onto a towball.

km/h

130

ATTENTION – SAFETY REQUIREMENTS

-The correct installation and use of this cycle carrier is the sole responsibility of the user.

-Weight and maximum capacity of “ZX203” bike racks:

-Model ZX203 (14, 74 kg)

- 3 bikes, max. capacity 51 kg. Max individual bike weight 17 kg.

-Never exceed the vehicle manufacturer’s static nose weight.

The combined weight of the bike rack and the load must never exceed the

permitted capacity. Keep the towball ball surface clean from dirt and oil.

-Remove from the transported bikes children’s seats, transport baskets, rain covers

or other elements that could get lost or increase the air resistance.

-The bike rack is only suitable for transporting bicycles.

-Before leaving, check that the rear lights function correctly.

Also check that the indicator lights work correctly.

-Ensure that the bike rack is fitted correctly on the towball and that the bikes

are secured as instructed.

When on the road, respect the highway code speed limits and pay attention to

the road conditions to prevent jolts.

-Be aware that the loaded bike rack may change the driving characteristics of the

car while braking, during windy conditions and whilst cornering.

-To avoid damage, if the boot lid is equipped with an automatic opening function,

use this function with care.

-Check all the bike rack fixing elements after a short while, then at regular intervals

whilst on your journey.

-Take care when reversing and parking because of the greater length of the car.

-Check the distance between the bike rack, the bikes and the exhaust pipe(s) to

avoid heat damage.

-To increase road safety and to reduce fuel consumption, remove the bike rack

when not in use.

-Modifications to the bike rack and its components are not permitted.

-Immediately replace any worn or damaged parts using only original spare parts.

-The bike rack can be cleaned using warm water and/or car shampoo.

-Store the bike rack in dry conditions at moderate temperatures.

The manufacturer is not responsible for damage caused by improper use of this

product, nor for any objection made by the competent authorities with regard to

the highway code.

The manufacturer shall only be responsible for manufacturing defects in the bike

rack and accessory components.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Witter ZX203 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info