Bedienungsanleitung Wmf Kult X - 16480011 (Seite 7 von 33) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

690794

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

12 13

Overview of cutter inserts

The cutter inserts provided are marked with numbers on the outside to make them easy to tell apart:

1 Tagliatelle (ca. 9 mm)

2 Linguine (ca. 5 mm)

3 Spaghetti (ca. 3 mm)

Food (raw) Cutter insert 1 Cutter insert 2 Cutter insert 3

Apple (remove core)

(recommended)

Pear (remove core)

(recommended)

Broccoli stem

(recommended)

Carrot -

Potatoes

Cucumber (solid consistency) -

Sweet potato

Red radishes

Radish

Courgette

Note: The foods listed in the table serve as a guide; the appliance can also be used to process other

foods. As the hardness of food can vary, the use of cutter inserts is recommended.

Before using for the ﬁrst time

Clean the device before use as described in the chapter on “Cleaning and Care”.

▪ Place the the cutter insert holder into the motor unit.

▪ Choose the cutter insert you want and stick it into the rack.

Please note: The blades on the cutter inserts are sharp; pick the cutter inserts up only by the

plastic parts.

▪ Now place the ﬁller tubes on the cutter insert and twist them in a clockwise direction until you can

feel them lock into place. Note: If the ﬁller tubes are not locked in place, it will not be possible to

operate the machine.

▪ Place the transparent collection container inside the device to collect the food after it has been cut

into a spiral shape.

▪ Now insert the mains plug into the socket.

▪ Then pierce the relevant piece of food on the stopper.

Please note: The skewer support on the stopper has sharp edges.

▪ Pour the food with the stopper into the ﬁller tubes and turn the device on using the start/stop

button.

Note: Only press lightly with the stopper onto the ingredients so that they are in contact with the

insert.

▪ Turn the device off after cutting in order to ﬁll it again.

▪ Remove the mains plug once you are ﬁnished cutting. Take the cutter insert out by pressing gently

from underneath (see picture).

Please note: The blades on the cutter inserts are sharp; pick the cutter inserts up only by the

plastic parts.

Useful tips

▪ Brieﬂy reduce the pressure on the stopper at regular intervals during the cutting to stop endless

spirals from being created. This way the vegetable noodles will be shorter and easier to portion out.

▪ Wherever possible you should ﬁll the ﬁller tubes vertically to get the best results.

▪ The more level the outer surface of the food is, the easier the endless spirals are to cut. For that

reason, food such as carrots should be sliced before cooking.

▪ Food with a diameter of more than 60 mm cannot be processed, however they can be made into a

round shape by cutting off the sides and then processed.

▪ We recommend a maximum chopping time of 2 minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wmf Kult X - 16480011 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info