Bedienungsanleitung Wmf Lono - 0413060021 (Seite 10 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

551545

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

▪ No liability is accepted for any damages resulting from misuse, incorrect

operation or improper repairs.

Claims under warranty are likewise excluded in such cases.

▪ Packaging material, such as plastic ﬁlm bags, do not belong in the hands of

children.

Start-up

Thoroughly clean the inside of the pot prior to the ﬁrst use. To do so, open the lid

by pressing the button on the handle.

A strainer insert in the pour spout ensures that larger limescale particles are kept

back when pouring.

The unnecessary length of the connecting cable can be wound at the bottom of

the base part.

Connect the mains plug to an earthed socket.

Fill with the desired amount of water up to the Max line. Close the lid. Only in

this way does the automatic boil stop work reliably.

Place the pot on the base in any position. Now you can press down the power

switch below the handle. The control lamp in the power switch shows that the

device is heating.

The power switch only engages if the pot is on the base.

Do not use the water from the ﬁrst boiling process for food preparation.

Automatic shutoff

The automatic boil stop switches off the device shortly after the water is boiled.

The shutoff time is extended if the pot is only ﬁlled with a little water.

If only warm water is desired, the heating process can always be stopped by

pressing the power switch. The shutdown takes place automatically if the pot is

lifted from the base.

For functional reasons, some condensation may run out of the outlet openings

at the bottom of the handle to the edge of the base. This happens for technical

reasons and does not impair the safety of the device.

Safety system

A thermostat protects the kettle from overheating due to accidental operation

without water by switching off the device.

It is essential to allow the pot to cool down before ﬁlling with water.

Should the ﬁrst thermostat malfunction due to improper use, an additional

temperature limiter ensures reliable protection.

Cleaning and maintenance

Remove the mains plug and allow the device to cool down. Do not immerse the

device in water, but rather clean them with a damp cloth with a little washing-up

ﬂuid and then dry off.

Do not use any sharp and abrasive cleaning agents.

The pot is made of stainless steel. Should rust spots nevertheless appear, they are

only deposits adhered to the surface. They should be removed immediately with a

stainless steel cleanser.

The strainer insert in the pour spout can be removed for cleaning when the lid is

open. To do so, press its upper clip upward. When inserting, place the strainer in

the middle of the base and then snap it forward into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wmf Lono - 0413060021 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info