Bedienungsanleitung WOLF-Garten 2.32 E-1 (Seite 13 von 33) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

638521

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Maintenance

1 Caution! Rotating cutters

Before all maintenance and cleaning tasks:

z Pull the mains plug out.

z Take care not to grab running cutters.

z Check all the visible fixing bolts and nuts regularly for tight-

ness and retighten, particularly those of the cutter beam.

z Do not store the mower in damp rooms.

z For safety reasons, replace worn or damaged parts.

z Use only original WOLF spare parts, otherwise there is no gua-

rantee that your mower complies with the safety regulations.

Disposal

Assembly

Fixing the grab handle

1 Caution!

When collapsing and unfolding the grab handle, the cable

could be damaged.

z Take care that you do not kink the cable.

z See illustrations for assembly.

Fitting the collecting basket

1. Insert the projections of the collecting basket upper section

into the openings in the collecting basket lower section.

2. Push the collecting basket upper section evenly onto the coll-

ecting basket lower section.The collecting basket is securely

located as soon as it clicks in position.

Operation

Operating times

z Please observe the regional regulations.

z Request the operating times from your local authorities.

Insert the cable into the tension relief unit

z Please insert the cable into the tension relief unit in accor-

dance with the illustrations

Fit the collecting basket

1 Caution! Rotating cutters

Settings only to be carried out on the mower with the motor

switched off and with the cutting tools at a standstill.

z Only insert the collection basket when your feet are at a

safe distance from the cutting tools.

1. Lift the protection cover.

2. Hang the collection basket in the notches in the chassis (see

arrow) using the hooks.

3. Apply the protection cover.

Setting the cutting height

1 Caution! Rotating cutters

Settings only to be carried out on the mower with the motor

switched off and with the cutting tools at a standstill.

z switch the motor off and pull the plug out from the mains.

1. Pull the lever outwards .

2. Adjust to the required cutting height .

3. Push the lever back inwards .

Cutting height– Grass condition

z Mow when the lawn is dry if possible, to protect the turf. If the

lawn is wet and the grass is long, it may be better to mow with

a higher cutting height.

z Generally, you should set a cutting height of 40 mm.

Connection to the plug socket (230 Volt, 50 Hz)

z Only connect the mower to plug sockets having a 16 Amp.

fuse (slow acting) (or LS Switch Type B).

3 Note: Residual current protection device

These protection devices protect against serious injury

when touching damaged wires, insulation faults and in cer-

tain cases also when damaging wires under potential.

z We recommend that the mower only be connected to

plug sockets which are protected by a residual current

protection device (RCD) having a residual current of no

more than 30 mA.

z There are retro-fitting sets for older installations. Consult

your specialist electrician.

Switching the mower on/off

z Switch the mower on when standing on level ground.

z Not in long grass– or tilt if necessary .

Motor on

1. Push button (1) and hold it down.

2. Pull the bracket (2).

3. Release the button (1).

Motor off

z Release the bracket (2).

Tips for mowing

z In order to prevent stripes on the lawn, always overlap the

tracks of the cut by a few centimetres .

z Always lay the cable securely on the terrace, paths or grass

which has already been cut.

Electrical equipment must not be placed in the hou-

sehold waste.The unit, accessories and packing

material should be taken to an environment-friend-

ly recycling unit.

A B C D E

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten 2.32 E-1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info