Bedienungsanleitung WOLF-Garten 46 BAM (Seite 14 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

638535

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Operation

Operating times

z Please check noise abatement regulations prevailing in your

country.

Starter cord assembly

46 BAM

1. Press locking forward (2).

2. Lift and hold operator presence bail arm (3).

3. Pull the starter rope slowly to the holding bracket.

Twist the cord through the holder.

51 BA

1. Lift and hold operator presence bail arm (1).

2. Pull the starter rope slowly to the holding bracket.

Twist the cord through the holder.

3 Always remove the starter cord from the holder before

folding the mower handles.

Oil Fill

1 Check oil level with mower standing on level ground.

Fill crankcase with quality oil SAE 30 up to the mark „Full“

on dipstick. (Do not overfill.) Capacity approx. 0,6 litre.

Screw in dipstick.

Filling with fuel

1 Caution! Rotating blades

Settings only to be carried out on the machine with the mo-

tor switched off and with the working tools at a standstill.

z Use only normal lead-free petrol.

z Avoid spilling petrol.

z Do not inhale the vapour.

Hang up collection bag

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z See illustrations .

Set cut height

1 Attention! Rotary cutter blade

Undertake work/adjustments on the equipment only after

the motor is switched off and the cutting tool has come to a

standstill.

1. Pull the lever out.

2. Set the desired cutting height.

3. Press the lever back in.

Selection of Cutting height

z If possible, mow when grass is dry in order to protect turf. Do

not set cutting position too low when mowing very hight or wet

grass.

z We recommend an average cutting height of 40-50 mm.

Mowing (46 BAM)

z On firm ground, preferably not in the high grass.

Engine start / stop

1. Open petrol tap .

2. Set throttle lever on „MAXI“

(1).

3. Pull starter grip rapidly and return slowlyn.

Start / stop of blades

1. Press locking forward (2).

2. Pull and hold safety bar

(3).

z Stop blade: Release safety bar.

Start / stop of wheel drive

z Start wheel drive: lift drive bar (4).

z Stop wheel drive: release drive bar

(4).

3 When you release the safety bar the bla-

de will stop. So the wheel drive can be used for dri-

ving the mower outside of lawn.

1 For mowing first clutch in the blade be-

fore using drive bar.

Stop engine

z Set throttle lever on „STOP“.

Mowing (51 BA)

z On a flat surface, if possible not in high grass.

Motor starten

1. Open gas cock .

2. Raise and hold the safety bracket (1).

3. Pull starter grip and return it slowly by hand.

Wheel drive starten/stoppen

1. Wheel drive on: Raise drive bracket (2).

2. Wheel drive off: Relapse drive bracket (2).

Stop Motor

z Release safety bracket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten 46 BAM Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info