Bedienungsanleitung WOLF-Garten A 4600A (Seite 12 von 312) (Alle Sprachen)

799078

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

English Operating Instruction – Lawnmower with IC engine

Fig. 3

Set the cutting height of the grass

as required.

Setting option (depending on

model) from approx. 3

cm to

maximum 9

cm.

Note

If appliances have individual wheel

adjustment, set all wheels to the

same height.

Model A

Attach the wheels in the position

required.

Model B

Pull the flap and snap into place

in the position required.

Model C



Advance or push back the lever of

the central vertical adjustment and

snap into place in the position

required.

Locking front wheels

(only appliances with lockable front

wheels)

Fig. 4

Lock wheels to drive straight ahead

– set the wheels in forward position

and put hoop into large hole.

Wheels are freely movable – put

clamp into large hole.

Fill up with fuel and check the

oil level

Fill up with lead-free petrol (see

engine manual).

Fill fuel tank up to max. 2 cm

below the lower edge of the inlet

nozzle.

Close fuel tank tightly.

Check oil level and, if required,

top up (see Engine manual).

Starting the engine

Fig. 5

Danger

To prevent injury:

– Do not start the engine when you

are standing in front of the

ejector;

– Keep hands and feet well away

from the cutting blade;

– never place your hands, feet, or

other parts of the body near

rotating parts; Always keep away

from the ejector.

Before starting the engine,

disengage the clutches for all

cutters and drives.

Do not tip the appliance when

starting. Keep the appliance on an

even surface with little or the

shortest possible grass.

Information about the engine

Observe the information in the

engine manual.

– Some models have no throttle

and the speed is adjusted

automatically. The engine

always runs at optimum speed.

– Even if the engine is warm, it may

be necessary to actuate the

choke or the primer.

– Some models have no choke and

no primer. The engine is

automatically set to the particular

starting process.

If the engine is cold:

Open the fuel tap (if fitted).

Units with choke :

Set the choke lever to , or pull

out the choke and set the

accelerator lever (if fitted) to

/max. (Fig. 5A)

Set the accelerator lever to -

fig. 5A.

Appliances with primer:

Press primer forcefully 1–5x and

move throttle (if fitted) to

/max. – fig. 5B.

If the engine is warm:

Open the fuel tap (if fitted).

Set throttle (if available) to

/max. – Fig. 5B

Appliances without electric starter:

Fig. 5C

Stand behind appliance – Press

and hold safety lever.

Slowly pull the starter cable grip

until you feel resistance, and

then pull quickly and strongly. Do

not let the pull-starter handle

spring back, but slowly guide it

back.

For appliances with electric starter:

Fig. 5D

Disconnect charger from power

supply and unit.

Stand behind appliance – Press

and hold safety lever.

Turn ignition key on the steering

handle until the engine starts

(start attempt max. 5 seconds,

wait 60 seconds before the next

attempt).

Note:

If appliances feature electric

starter, the engine (depending on

model) can also be started

manually with the pull-starter

handle.

When the engine is running:

After starting the engine

(depending on the model):

– return the choke (if fitted),

– move the accelerator lever (if

fitted) between /max and

/min so that the engine can

warm up briefly.

Set the throttle to full throttle (if

available).

Note

If you need more information about

operating the engine, please refer

to the engine manual.

Stopping the engine

Fig. 7

Bring throttle (if available) into

position /min.

Release the safety hoop. The

engine and the cutting tool stop

after a short time.

Working with the snow-

clearing machine

Engaging/disengaging gear

drive

(only in the case of appliances with

gear drives)

Fig. 6A, B, C

Wheel drive activation

/ :

Pull and hold the lever/hoop.

Wheel drive deactivation

/ :

Release lever/hoop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten A 4600A Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info