Bedienungsanleitung WOLF-Garten A 530 A SP HW (Seite 12 von 290) (Alle Sprachen)

799081

Zoom out

Zoom in

Vorherige Seite

1/290

Nächste Seite

Operating instructions – Lawnmower with IC engine English

Fill up with fuel and check the

oil level

Fill up with lead-free petrol (see

engine manual).

Fill fuel tank up to max. 2 cm

below the lower edge of the inlet

nozzle.

Close fuel tank tightly.

Check oil level and, if required,

top up (see Engine manual).

Starting the engine

Fig. 5

Danger

To prevent injury:

– Do not start the engine when you

are standing in front of the

ejector;

– Keep hands and feet well away

from the cutting blade;

– never place your hands, feet, or

other parts of the body near

rotating parts; Always keep away

from the ejector.

Before starting the engine,

disengage the clutches for all

cutters and drives.

Do not tip the appliance when

starting. Keep the appliance on an

even surface with little or the

shortest possible grass.

Information about the engine

Observe the information in the

engine manual.

– Some models have no throttle

and the speed is adjusted

automatically. The engine

always runs at optimum speed.

– Even if the engine is warm, it may

be necessary to actuate the

choke or the primer.

– Some models have no choke and

no primer. The engine is

automatically set to the particular

starting process.

If the engine is cold:

Open the fuel tap (if fitted).

Units with choke :

Set the choke lever to , or pull

out the choke and set the

accelerator lever (if fitted) to /

max (fig. 5A)

Set the accelerator lever to -

fig. 5A.

Appliances with primer:

Press primer forcefully 1–5x and

move throttle (if fitted) to /max

– fig. 5B.

If the engine is warm:

Open the fuel tap (if fitted).

Set throttle (if available) to /

max – fig. 5B

Appliances without electric starter:

Fig. 5C

Stand behind appliance – Press

and hold safety lever.

Slowly pull the starter cable grip

until you feel resistance, and

then pull quickly and strongly. Do

not let the pull-starter handle

spring back, but slowly guide it

back.

For appliances with electric starter:

Fig. 5D

Disconnect charger from power

supply and unit.

Stand behind appliance – Press

and hold safety lever.

Turn ignition key on the steering

handle until the engine starts

(start attempt max. 5 seconds,

wait 10 seconds before the next

attempt).

Note:

If appliances feature electric

starter, the engine (depending on

model) can also be started

manually with the pull-starter

handle.

When the engine is running:

After starting the engine

(depending on the model):

– return the choke (if fitted),

– move the accelerator lever (if

fitted) between /max and

/min so that the engine can

warm up briefly.

Set the throttle to full throttle (if

available).

Note

If you need more information about

operating the engine, please refer

to the engine manual.

Stopping the engine

Fig. 7

Bring throttle (if available) into

position /min.

Release the safety lever. The

engine and the cutting tool stop

after a short time.

Working with the snow-

clearing machine

Engaging/disengaging gear

drive

(only in the case of appliances with

gear drives)

Fig. 6

Putting gear drive into gear :

Push the wheel drive lever (2)

together with the safety lever (1)

forward. The further they are

pressed forwards, the faster the

appliance moves.

Throwing gear drive out of gear

Pull the wheel drive lever (2)

together with the safety lever (1)

fully back.

Note

When the unit is pulled back, there

may be increased resistance on the

back wheels on account of the

design. This is not a fault with the

appliance but occurs for technical

reasons.

Remedy (depending on model):

Without pulling the drive handle,

push appliance forwards a little,

then backwards.

Detaching and emptying the

grass sack

(for appliances with grass catchers)

Fig. 11

If cut grass is left lying on the

ground or if the level indicator

(optional, Fig. 12) indicates that the

basket is full:

Release the safety lever and wait

until the engine stops.

Lift the deflector flap and unhook

the grass sack.

Empty out the contents.

Working without the grass sack

Whenever you detach the grass

sack, the deflector flap drops down.

When working without a grass

catcher, the mowed grass is

ejected directly downwards.

Retrofitting for mulching

(for appliances with optional

mulcher)

Fig. 8A

Lift the ejection flap.

Remove the grass catcher.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten A 530 A SP HW Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info