Bedienungsanleitung WOLF-Garten Compact plus 34 AC (Seite 16 von 39) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

638415

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Emptying of Grassbox

When the collection bag is full, the flap lowers by itself.

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Switch the motor off and pull the plug bracket out.

z Empty collection bag.

z Remove potential blockages in the cutting space before

starting.

3 Instructions for level indicator:

For an efficient functioning of the level indicator, regularly

clean the holes under the level indicator in the collection

bag with a hand brush.

Mulch

„Mulching“ is a process in which the grass is finely chopped by a

special cutting system and then deposited on the ground. The re-

sult is that the grass does not have to be collected and disposed

of. „Mulching“ also prevents the lawn from drying out.

3 Instructions for mulching

We recommend:

z Depending on the growth of grass, mulch 1 – 2 x per

week

z The grass should not be too high nor too wet!

z Go slow while mulching

z Take care that the blade channels do overlap.

z Do not cut grass more than 20 mm.

3 Note:

Mulching is not advisable in case of moss-affected or

entangled grass, because the cut material stays on the

moss surface and/or entanglement and thus cannot be

absorbed by the ground.

z Regularly scarify and manure the lawn.

Activating the mulch function

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Do not start the motor until your feet are at a safe dis-

tance from the cutting tool.

1. Remove the grass collecting bag.

2. Set the switch to „MULCH“.

3. Start the motor.

Maintenance

General

1 Attention! Rotary cutter blade

Before all maintenance and cleaning work:

z Pull the plug bracket out.

z Do not touch running blades.

Cleaning

z Clean mower thoroughly after each mowing with cloth or

brush.

z Clean the mulch flap at regular intervals with a small

broom .

z Do not spray with water.

Winter Storage

z Clean mower thoroughly before storing away.

z Have your mower thoroughly checked once a year by an ap-

proved Service Centre.

z Do not store it in a wet or humid place.

Changing blades

z Caution! - Sharp cutting blades - pull the plug bracket out

before performing any maintenance work.

1 Attention!

An unbalance can develop after regrinding of the blade.

z Always regrind the blades in a specialist workshop,

because an unbalance check should be undertaken

according to the safety regulations.

z Always change blades in a specialist workshop. A torque

spanner of 10 mm is mandatorily required.

Fastening torque of the screws: 6 - 7 N-m .

Spare parts

Item number Order description Product information

4904 031 Grass catcher

4908 096 Vi 34 X Replacement blade 34 cm

4908 072 Charger

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten Compact plus 34 AC Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info