Bedienungsanleitung WOLF-Garten LI-ION POWER HSA 45 V (Seite 12 von 158) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

517922

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

Electric safety

z The power plug of the electric tool must fit

properly into the mains socket. Do not

modify the plug in any way. Do not use ad-

apters to connect earthed electrical tools.

Unmodified plugs and matching sockets re-

duce the risk of electric shock.

z Avoid contact with earthed objects such

as pipes, radiators, cookers and refrigera-

tors. When your body is in contact with an

earthed device, there is an increased risk of

electric shock.

z Protect all electric tools against rain and

dampness. There is an increased risk of

electric shock, if water enters the electric tool.

z Do not carry or suspend the tool by the

power cable and do not pull the cable to

disconnect the plug from the socket.

Keep the cable away from heat sources,

oil, sharp edges and moving tool parts.

Damaged or entangled cables increase the

risk of electric shock.

z When using the electric tool outdoors,

use only extension leads that are desi-

gned for outdoor use. The use of extension

leads designed for outdoor use reduces the

risk of electric shock.

z If it is not possible to avoid using the elec-

tric tool in a wet environment, use a fault

current circuit breaker. The use of a fault

current circuit breaker reduces the risk of

electric shock.

Personal safety

z When working with the electric tool, ensu-

re that your full attention is on the task in

hand, do not let yourself be distracted and

apply common sense. Do not use the

electric tool when you are tired, or when

you are under the influence of drugs alco-

hol or medication. Even brief moments of

inattention can lead to serious injury.

z Wear personal protective equipment and

protective goggles. Wearing personal pro-

tective equipment such as dust mask, safety

footwear, hard hat and hearing protection re-

duces the risk of injury. Whether this equip-

ment is necessary depends on the type of the

electric tool.

z Avoid inadvertent start-up of the electric

tool. Ensure that the electric tool is swit-

ched off before carrying it or disconnec-

ting/connecting it to the power supply

(mains or battery). When carrying the elec-

tric tool, do not place your finger on the switch

and do not connect it to the power source

while it is switched on, as this could cause in-

jury.

z Before switching on the electric tool, re-

move all adjusting tools such as span-

ners, etc. Tools or spanners left on a rotating

part can cause injury.

z Avoid unnatural postures. Ensure that

you are standing on firm ground and avo-

id a posture where you could lose your

balance.

This ensures that you will be able to control

the electric tool even in unexpected

situations.

Wear suitable clothing. Do not wear loose

clothing or jewelry. Keep your hair, clo-

thing and gloves away from moving parts.

Loose clothing and jewelry and long hear can

be caught in moving parts.

When using tools with dust extraction and

collection devices, ensure that they are

properly mounted.

The use of dust extraction devices helps

reduce the production of dust in the working

area.

Proper use of electric tools

z Do not exceed the maximum load of the

tool. Use the tool only for the intended

purpose. To ensure safe and efficient wor-

king, operate the electric tool only within the

specified power range.

z Do not use electric tools whose switches

are defective. Electric tools that cannot be

properly switched on or off are dangerous

and must be repaired without delay.

z Before adjusting the tool, changing ac-

cessory parts or putting the tool away for

storage, disconnect the power plug from

the socket or remove the battery. This sa-

fety measure reduces the risk of inadvertent

tool start.

z Store the electric tool outside the reach of

children. Do not allow persons who have

not read these instructions to operate the

tool. When operated by inexperienced per-

sons, electric tools can be very dangerous.

z Handle the electric tool with care and ser-

vice it regularly. Ensure that all moving

parts can work properly and are not jam-

med and regularly inspect the tool for de-

fective or damaged parts that might

impair its function. Have damaged parts

repaired before you start the tool. Many

accidents are caused by insufficiently main-

tained electric tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten LI-ION POWER HSA 45 V Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info