Bedienungsanleitung WOLF-Garten Li-Ion Power RR-T 6000 (Seite 13 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

638325

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

z Avoid inadvertent start-up of the electric

tool. Ensure that the electric tool is swit-

ched off before carrying it or disconnec-

ting/connecting it to the power supply

(mains or battery). When carrying the electric

tool, do not place your finger on the switch and

do not connect it to the power source while it is

switched on, as this could cause injury.

z Before switching on the electric tool, remo-

ve all adjusting tools such as spanners,

etc. Tools or spanners left on a rotating part

can cause injury.

z Avoid unnatural postures. Ensure that you

are standing on firm ground and avoid a

posture where you could lose your balan-

ce. This ensures that you will be able to control

the electric tool even in unexpected situations.

z Wear suitable clothing. Do not wear loose

clothing or jewelry. Keep your hair,

clothing and gloves away from moving

parts. Loose clothing and jewelry and long

hear can be caught in moving parts.

Proper use of electric tools

z Do not exceed the maximum load of the

tool. Use the tool only for the intended pur-

pose. To ensure safe and efficient working,

operate the electric tool only within the speci-

fied power range.

z Do not use electric tools whose switches

are defective. Electric tools that cannot be

properly switched on or off are dangerous and

must be repaired without delay.

z Before adjusting the tool, changing acces-

sory parts or putting the tool away for sto-

rage, disconnect the power plug from the

socket or remove the battery. This safety

measure reduces the risk of inadvertent tool

start.

z Store the electric tool outside the reach of

children. Do not allow persons who have

not read these instructions to operate the

tool. When operated by inexperienced per-

sons, electric tools can be very dangerous.

z Handle the electric tool with care and ser-

vice it regularly. Ensure that all moving

parts can work properly and are not jam-

med and regularly inspect the tool for de-

fective or damaged parts that might impair

its function. Have damaged parts repaired

before you start the tool. Many accidents are

caused by insufficiently maintained electric

tool.

z Keep the cutting parts sharp and clean. Ca-

refully maintained cutting tools with sharp cut-

ting edges will rarely get jammed and are

easier to operate.

z When using the electric tool, the accesso-

ries and replacement parts, strictly adhere

to the instructions in this manual. Take into

account the actual working conditions and

the task in hand. The use of electric tools for

purposes other than the intended can lead to

dangerous situations.

Proper use of battery-powered tools

z Recharge the battery only with chargers

that have been specifically recommended

by the manufacturer. If a different charger is

used, there is a risk of fire.

z Operate the electric tool only with the bat-

tery provided for this task. The use of other

batteries can lead to injury or fire.

z Ensure that the battery is never in contact

with metal objects such as paper clips,

coins, keys, nails or screws, as they could

short-circuit the contacts. Short-circuiting

the battery contact can lead to fire and injury

from burns.

z If the battery is used incorrectly, fluid might

leak out. Avoid contact with the fluid. In

event of accidental contact, rinse with wa-

ter. In case of fluid contact with the eyes,

consult a doctor. Leaking battery fluid can

cause irritation of the skin and burns.

Service

z If the electric tool needs to be repaired,

have the repair carried out by specialist

personnel and instruct them to use only

original spare parts. This ensures the opera-

tional safety of the equipment.

Tool-specific safety instructions

z Check the tool to ensure that all mounted parts

are properly secured and inspect it for damage

and excessive wear. Do not operate the tool if

the blade protection is damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten Li-Ion Power RR-T 6000 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info