Bedienungsanleitung WOLF-Garten SD 240 E (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

638219

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Safety instructions

Extent of delivery

Operation

Operating times

Please consider the individual country speciﬁ cations.

After unpacking, check the contents of the box

• That it is complete

•Check for possible transport damage

Report any damage or missing items to your dealer, supplier or the manufacturer immediately. Complaints made at a later date

will not be acknowledged.

• 1

preassembled unit of equipment

• 1 standing leg (left)

• 1 standing leg (right)

• 1 axle

• 2 wheels

• 1 screw bag

Start-up

•

Check that the machine is completely and correctly assembled.

•

To avoid toppling, place the chopper on a ﬁ rm horizontal surface.

• Do not place the equipment on ground which is paved or sur-

faced with gravel.

• The machine should only be operated in the open. Always

maintain a safe distance (at least 2 m) from walls or other

ﬁ xed objects.

• Before using the shredder, make sure each time that

- there are no faulty connections (tears, cuts, etc.)

- there are no damage at the machine

- all screws are tight

Mains connection

• Compare the voltage given on the machine model plate e.g.

230 V with the mains voltage and connect the machine to the

relevant and properly earthed plug.

• Only use connection cables with sufﬁ cient diameters

• Fuse protection

2000 W - 16 A (13 A inert only UK / CH / IR)

2400 W - 16 Ainert (13 A inert

only UK / CH / IR)

Switch on and off

Motor guard

The motor is equipped with a guard switch and it switches off

automatically when overloaded. The motor can be switched

on again after a cooling-down period (approximately 5 min.).

In the event of a power failure, the machine will switch off

automatically (zero-voltage initiator). Press the switch again

to restart the machine.

Electrical mains supply impedance

When conditions in the electrical mains supply are un-favour-

able, voltage reductions for short periods can occur during

the process of turning on the equipment, which can adversely

affect other equipment (e.g., the ﬂ ickering of a lamp).

• Check the machine for possible damage

- Before continuing to use the machine, the protective devices must

be inspected to ensure that they work perfectly and with their

intended function

- Check whether the parts are damaged. All parts must be correctly

installed and fulﬁ l all conditions to ensure perfect operation of the

saw

- Damaged guards and parts must be properly repaired or

exchanged by a recognized, specialist workshop; insofar as noth-

ing else is stated in the instructions for use.

- Damaged or illegible safety warning labels should be replaced

immediately.

Electrical safety

• Design of the connection cable according to IEC 60245 (H 07 RN-

F) with a core cross-proﬁ le section of at least

- 1.5 mm

for cable lengths up to 25m

- 2.5 mm

for cable lengths over 25m

• When laying the connecting attachments, be sure that they do get

crushed or bent, and that the plug-and-socket connection does not

get wet.

• Do not use the cable for purposes for which it is not meant. Protect

the cable against heat, oil and sharp edges. Do not use the cable

to pull the plug from the socket.

• Regularly check the extension cables and replace them if they are

damaged

• Do not use any defective connection cables

• When working outdoors, only use extension cables especially

approved and appropriately labelled for outdoor use

• Do not set up any provisional electrical connections

• Never bypass protective devices or deactivate them.

The electrical connection or repairs to electrical parts of the

machine must be carried out by a certiﬁ ed electrician or one

of our customer service points. Local regulations – especially

regarding protective measures – must be observed.

Repairs to other parts of the machine must be carried out by

the manufacturer or one of his customer service points.

Use only original spare parts, accessories and special accessory

parts. Accidents can arise for the user through the use of other

spare parts. The manufacturer is not liable for any damage or

injury resulting from such action.

OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten SD 240 E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info