Bedienungsanleitung WOLF-Garten TC 38 M (Seite 8 von 19) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

638392

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Assembly

Included with the delivery

Check the contents of the shipping box when unpacking for,

• Completeness • possible transport damage

Communicate damage claims or missing items immediately to

your dealer, freight forwarder, or manufacturer. Later claims will

not be recognized.

• Lawn mower

•

Handle – lower piece, handle – upper piece, 2 middle pieces

• Bag with mounting parts

• Operating instructions / list of repair shops

Mount handle assembly (Fig. M1)

Handle – lower piece (1)

Handle - middle pieces (2)

Handle – upper piece (3)

Operation

Please carefully retain the guarantee card completed by the

seller, or the proof of purchase.

The company WOLF-Garten provides a guarantee for 24 months

from the date of purchase. This guarantee is in accordance with

the relevant state of technology and the utilisation purpose / area of

application. The consumer‘s statutory rights are not affected by the

following guarantee guidelines.

Pre-conditions for the 24-month guarantee entitlement:

- Deployment of the device solely for private use.

The guarantee is reduced to 12 months in the commercial

sector or leasing business.

- Proper handling and observance of all information given in the

operating manual, which forms part of our guarantee terms.

- Observance of the prescribed maintenance intervals.

- No unauthorised alteration of the design.

- Installation of original WOLF replacement parts / accessories.

Presentation of the completed guarantee card and/or proof of purchase.

This guarantee does not extend to normal wear-and-tear on blades,

blade mounting components or friction disks, V-belts/toothed

belts, running wheels/tyres, air filters, spark plugs and spark plug

connectors. Any guarantee claim shall be immediately void in the

event of unauthorised repairs. Faults and defects which can be traced

to material or manufacturing faults will be rectified exclusively by our

contracted workshops (the seller has the right to remedy a defect) in

your vicinity, or by the manufacturer if the latter is closer. Any claims

going beyond the provision of a guarantee are ruled out. There is

no entitlement to a replacement.

Any transport damage should be

reported not to us but to the shipper in question since, otherwise, any

compensation claims vis-à-vis the shipper would be voided.

Adjusting the cutting height (Fig. B1)

There are 5 positions for cutting height (18, 23, 28, 32,

40 mm).

Pull the adjusting arm (1) away from the sidepiece and let it

re-engage in the desired cutting height position (2). Adjust, by

1 position only, alternating right and left. The adjustment arms

must always be on the same height position.Note:Adjust the

cutting height so that the bottom blade has no ground contact

if there are uneven areas on the lawn surface.

Mowing

To maintain a well-groomed lawn, the grass must be cut at

least once a week. The grass must be dry, for the most part,

when it is mowed. The mowing path should be as straight as

possible using a normal walking speed. The mowing paths

must always overlap by several centimetres to prevent strips

of grass being left uncut.

New blade condition „Mach 15“

Mowing:

Higher pushing forces are possible due to the design of the

system. The blade is automatically optimized, i.e. the blade

spindle adapts exactly to the bottom blade after mowing for

some time (approx. 2 hrs.).

Adjusting the lower blade (Fig. B2)

You must readjust the blade if the mower no longer cuts the

lawn uniformly and cleanly.

Caution: Wear protective gloves.

Turn over the mower as illustrated. Adjust by loosening or

tightening the two lock nuts (3) on the bottom blade (4).

Required tools: Spanner (wrench) 10 mm AF.

Turn the lock nut (3) to the left:

The clearance to the blade cylinder (5) decreases.

Turn the lock nut (3) to the right:

The clearance to the blade cylinder (5) increases. Adjust the

lower blade in such a manner that all cutting edges of the

blade cylinder touch lightly.

Cutting test with paper (Fig. B3)

Caution: Wear protective gloves.

The adjustment is correct if a piece of paper between the

blade spindle and the lower blade is cut cleanly. To do

this turn the blade cylinder by hand.

Note:

If problem-free cutting results are not obtained, in spite of

adjustment as prescribed, then the blade spindle, and/or the

bottom blade must be checked (see maintenance).

Care and storage

Clean the mower after each use with a hand brush and store

in a dry location. The ball bearing, roller axle and the cutting

edges of the blades should be treated with environmentally

safe, biodegradable spray oil once a year.

Changing blades (Fig. W1)

Caution: Wear protective gloves.

Change worn blades only as a set (15 blades)

15 replacement blades TC-M, part no.: 3628 094

Maintenance

New blade condition „Mach 15“

1. Adjust bottom blade (B2).

2. Conduct cutting test with paper (B3).

Repairs

All other repairs must be performed by a WOLF service

center

We recommend: Have your mower thoroughly checked once

a year by approved Service Agent.

Guarantee terms

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten TC 38 M Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info