3. Installation
All dimensions in this chapter are given in millimetres.
Observe the required minimum distances for proper ventilation (s. chapter 3.2.2
VENTILATION).
3.1 Unpacking and positioning
WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter CLEANING AND MAINTENANCE). Never remove any
components of the back of the appliance!
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The rating plate is inside the appliance or at the back.
3.2 Space and ventilation requirements
Observe the required minimum distances for proper ventilation.
