~ 143 ~
1. Disconnect the appliance from the mains: switch off the corresponding
fuse in the fuse box of your household power supply!
2. Place a dishcloth in the interior of the cold oven to protect it from possible
damage.
3. Unscrew the lamp cover anticlockwise. Clean the lamp cover and wipe it dry
thoroughly.
4. Unscrew the illuminant from the socket and replace it with a high temperature
illuminant (300
0
C) of the same type: Voltage 230 V / Power 25 W / Thread
E 14
5. Do not use any other type of illuminant.
6. Screw the new illuminant in. Check its proper position in the socket.
7. Replace the lamp cover.
8. Remove the dishcloth and switch on the corresponding fuse in the fuse box of
your household power supply again.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the eco-design requirements for non-
directional household lamps. This means that illuminants, which are used in
household appliances, must not be used to illuminate domestic establishments.
7.5 Removing of the oven door
1. Open the door and push the safety catches of
the two hinges upwards (s. fig. on the right).
2. Close the door slightly.
4. Lift the door and pull it towards your
direction carefully.
1. To reassemble proceed in reverse order (s.
above).
2. Check that the groove of the hinge bracket is
positioned properly in its guide.
3. After reassembling the door close the safety
catches carefully (s. fig on the right).
