Bedienungsanleitung Worcester-Bosch 2000 - GC2000iW C (Seite 6 von 16) (Englisch)

809301

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Prepare for operation

Worcester 2000 – 6 721 814 552 (2019/09)

2.3 Maintaining your appliance

Your new appliance represents a long term investment in a reliable, high

quality product.

Wipe the appliance casing with a soft clean cloth. Please do not use

chemical cleaning products which may damage the paint finish.

In order to realise the appliance’s maximum working life, and to ensure

the appliance continues to operate at peak efficiency and performance,

it is essential that servicing and maintenance checks are performed at

least once a year by a competent engineer in accordance with the current

Gas Safe Regulations.

If you would like to know more about servicing options from Worcester,

Bosch Group, please visit worcester-bosch.co.uk.

Please tick the appropriate box on your warranty registration card for

further details of the Worcester, Bosch Group Service Contract.

When your appliance requires servicing please contact a Worcester,

Bosch Group contact centre (see rear cover, appointments).

In addition to the service contract we are pleased to offer a one-off

annual service or breakdown call out for your appliance.

Maintenance tips

• Appliances on a sealed heating system:

– Regularly check the system pressure.

• Do not obstruct the flue outlet or the air inlet.

• Use in hard water areas:

– In exceptionally hard water areas a device to prevent scale

formation may be fitted. Installation of a salt based water softener

should be in accordance with the requirements of the local water

company. A bypass valve must be fitted and used to fill/top up the

heating system with untreated water.

Important note:

▶ If you have to add water regularly in your heating system, call a

competent, qualified person.

2.4 Benchmark standard

The Benchmark initiative is a code of practice

to encourage the correct installation,

commissioning and servicing of domestic

central heating appliances and system

equipment.

A “checklist” is dispatched with every appliance and can be found

towards the back of the Installation, Commissioning and Servicing

Instructions. This is a vital document that needs to be completed by the

installer at the time of installation. It confirms that the appliance has

been installed and commissioned according to the manufacturer's

instructions.

The service record provides space for the recording of regular servicing

of the appliance/heating system and this can become a valuable

document when, for example, you wish to sell the property. The service

record will show a potential purchaser that the heating system has

received regular professional maintenance and servicing during its

lifetime.

The Benchmark initiative aims to:

• Raise standards among professional installers.

• Build and maintain high safety standards in the industry.

• Improve customer satisfaction levels.

• Make a contribution to the nation's commitment to climate change.

3 Prepare for operation

3.1 Sealed heating system

Appliances that can be connected to sealed heating systems are pre-

pressurised before operation, this pressure must be maintained for safe

use of the appliance.

▶ Check regularly that the pressure is maintained.

▶ Re-charge the system if the pressure gauge reads less than 1 bar.

▶ If a permanent significant decrease or increase in pressure is

indicated on the pressure gauge, contact your installer or

maintenance engineer.

3.1.1 Checking the system pressure

Your installer will advise you of the optimum operating pressure.

▶ Check the system pressure from the pressure gauge.

–Static pressure is when appliance is cold and has not fired for

heating or hot water. This will generally be 1 - 1.5 bar.

–Operating pressure is when the appliance is firing for a heating

or hot water demand. This will generally be 1 - 2 bar.

▶ Top up the heating water, if the pressure is too low.

Fig. 2 Pressure gauge for checking the operating pressure

[1] Static pressure range

[2] Operating pressure range

3.1.2 Constantly re-pressuring the system pressure

Constantly having to re-pressuring the heating system should be

investigated as the concentration of inhibitor protection in the system

will be reduced; this can result in corrosion within the heating system

reducing the efficiency and increasing contaminates.

▶ Check for leaks on heating system (pipe work and radiator valves).

▶ Contact your installer or maintenance engineer if a recurring

significant decrease or increase in pressure is indicated on the

pressure screen.

0010015027-002

Min

Max

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worcester-Bosch 2000 - GC2000iW C Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info