697462
12
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
12
Service menu
CS200 – 6720830475 (2015/06)
7.1 Solar system settings
Fig. 8 Solar settings menu
If a solar system with extended functionality is installed,
corresponding menus and menu items become active. The
menus of the solar system are described in detail in the
operating instructions of the module installed (e.g. MS 200).
In the Solar settings menu with all solar systems the sub-
menus listed in Tab. 7 are available.
If the solar collector area is incorrectly set, the solar yield
displayed in the info menu is wrong as well.
Table 7 General settings for the solar system
7.2 Diagnosis
Fig. 9 Diagnosis menu
The Diagnosis service menu contains a number of tools for
diagnosis. Note that the menu items shown will vary depending
on the heating system.
7.2.1 Function tests
This menu can be used to test active system components
individually. If Enable function tests is set to Yes in this menu,
the normal heating operation is interrupted in the entire
system. All settings are saved. The settings in this menu are only
temporary and revert to the respective default settings as soon
as the Enable function tests is set to No or the Function test
menu is closed. The available functions and the possible
settings vary depending on the system installed.
A function test is performed by setting the parameters of the
listed component accordingly. You can check whether the
mixer, pump or valve responds appropriately by inspecting the
behaviour of the corresponding component.
The solar pump can be tested, for instance:
Off: The pump stops.
On: The pump starts.
7.2.2 Monitored values
System settings and measurements are displayed in this menu.
For example, the system can display whether the maximum
collector temperature or the current cylinder temperature has
been reached.
You can also call up detailed information on system parts, e.g.
the swimming pool. The information and values that are
provided depend on the system that has been installed.
Observe the technical documentation for modules and other
system components.
7.2.3 Fault displays
The current faults and the fault history can be called up in this
menu.
Table 8 Information in the fault display menu
7.2.4 System information
The software versions of the BUS nodes installed in the system
can be called up in this menu.
7.2.5 Maintenance
You can add a contact address in this menu. When the user
interface displays a fault code, the added address is also
displayed. The end customer can notify the installer to arrange
an appointment ( Chapter 9, page 14).
Menu item Purpose of the menu
Change solar
configuration
Graphical configuration of the solar
system
Current solar
configuration
Graphical representation of the
configured solar system
Solar parameters Settings for the installed solar system
Start solar thermal
system
Once all required parameters have been
set, the solar system can be started up.
0010003272-001
0010003114.001
Menu item Description
Active faults All current faults that are present in the
system are displayed here according to
their severity.
Fault history The last 20 faults are displayed here,
sorted in order of the time of occurrence.
The fault history can be deleted in the
Reset menu ( Chapter 7.2.6,
page 13).
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Worcester-Bosch CS 200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Worcester-Bosch CS 200

Worcester-Bosch CS 200 Bedienungsanleitung - Englisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info