Bedienungsanleitung Worcester-Bosch CS 200 (Seite 3 von 12) (Englisch)

697462

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Product Description

CS200 – 6720830474 (2015/06)

1.2 General safety instructions

H Instructions for the target group

These operating instructions are intended for the heating

system user.

All instructions must be observed. Failure to comply with

instructions may result in material damage and personal injury,

including possible loss of life.

▶ Read and retain the operating instructions (heat source,

heating controller, etc.) prior to operation.

▶ Observe the safety instructions and warnings.

H Determined use

▶ Only use the product to control solar heating systems in

domestic or light commercial applications.

Any other use is considered inappropriate. We take no

responsibility for damage caused through incorrect use.

H Inspection and maintenance

Regular inspection and maintenance are prerequisites for safe

and energy efficient operation of the heating system.

We recommend that an annual inspection takes place to ensure

optimum Solar system performance.

▶ All service work or system faults should be carried out by a

competent person.

H Damage caused by frost

The solar system can freeze if it is switched off:

▶ Observe the notices regarding frost protection.

▶ Due to the additional functions, e.g. DHW heating or pump

anti-seizure protection, the system should always be left

on.

▶ Have faults rectified immediately.

H Risk of scalding at the DHW draw-off points

▶ In order to avoid scalding a mixer must be installed in the

DHW system. If in doubt, ask your installer.

2 Product Description

The CS 200 solar controller is used to control a solar system.

2.1 Declaration of Conformity

The design and operation of this product comply

with European Directives and the supplementary

national requirements. Conformity has been

demonstrated by the CE marking .

You can ask for a copy of the Declaration of Conformity for this

product. Please refer to the contact address on the back cover

of these instructions.

2.2 Operation after a power failure

No parameter settings are lost in the event of a power failure.

When the power supply is restored, the solar controller

resumes operation. If necessary, the date and time may need to

be reset.

3 Overview of controls and symbols

Fig. 1 Control elements

[1] adv key – Lists the favourites

[2] man key – Deactivates the automatic change of the

temperature displayed in the standard display

[3] auto key – Activates the automatic change of the

temperature displayed in the standard display

[4] menu key – Opens the main menu

[5] info key – Opens the info menu (if standard display is

active) or further information about the current selection

[6] Back key – Returns to previous menu or discards a value

(press briefly); returns to the standard display (hold

down)

[7] Rotary control knob – Selects (turn) and Confirms

(press)

If the display lighting is dimmed, any button press activates the

light. The user then interacts as required. The instructions in

this manual assumes the display is already lit.

0010007391-001

auto

man

adv

info

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worcester-Bosch CS 200 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worcester-Bosch CS 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info