Bedienungsanleitung Worcester-Bosch Greenstar 8000 Style System

809245

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Operating the appliance

Greenstar 8000 Style – 6720883869 (2021/05)

3.3 Topping up the system pressure

External filling loop

Once the external filling loop and pressure display has been located,

follow the instructions for re-pressurising the system.

▶ Unscrew the blanking cap [1].

▶ Attach the hose [2] to the valve.

– Usually one end of the hose is already connected to one of the

system fill isolation valves.

▶ Ensure both ends [3] of the hose are screwed on hand tight.

▶ Monitor the pressure display.

– The system fill isolation valves [4] are in a closed position (the

handle/screwdriver slot is across the valve).

▶ Turn the handle/screwdriver slot through 90° to open valves and

slowly fill the system.

– The system fill isolation valves [5] are opened (the handle/

screwdriver slot is in-line with the valve).

– The pressure indicator on the pressure bars will start to move

towards the green bar.

▶ Set the pressure between 1 and 1.5 bar pressure.

Pressure indicator is on the green bar.

▶ Turn the handles/screwdriver slots back, through 90°, to close the

valves.

– The system fill isolation valves [6] are in a closed position (the

handle/screwdriver slot is across the valve).

▶ Top up the system pressure, if as a result of the air bleeding the

pressure drops off.

Once the pressure has settled between 1 and 1.5 bar.

▶ Ensure the valves are closed.

▶ Remove the hose [2] and replace the blanking cap [1].

Fig. 3

If the indicator is on the right hand side red pressure zone as a result of

over filling:

▶ Bleed one radiator until the pressure indicator returns to the green

bar.

4 Operating the appliance

4.1 Display overview

Fig. 4 Control Panel

[1] Display

[2]  and  keys

[3] Heating water pressure display

[4] d key

[5] OK key

[6] Menu key

[7] DHW key

[8] Heat key

[9] Burner display

4.2 Symbols in the display

0010022967-001

Min Max

Symbol Explanation

Connection with the Wi-Fi network (only available with

accessories)

Connection with RF transmitter, e.g. Comfort+ II RF room

thermostat (only available with Key accessories)

Central heating adjustment

auto: Heating is switched on and off according to

programmed times for heating .

Advance: Move to the next on or off time and directly

switch on or off heating.

Central heating off

Hot water adjustment (only available with optional integral

diverter valve kit)

Hot water off

Displays with the appliance status code and diagnostic

code during a fault condition.

Holiday symbol

Cleaning mode to enables the boiler to be cleaned without

making changes to the touch panel.

Central heating or hot water can be switched either

permanently on or off.

Energy consumption1)

0010033251-001

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worcester-Bosch Greenstar 8000 Style System - GR8700iW Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info