743361
10
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
Key (accessories)
Greenstar 8000 Style – 6720883869 (2018/05)
10
5 Key (accessories)
5.1 Installing the Key
Installing the Key will enable timer functions (Additional functions
4.6 "Settings in the menu", page 9). For Pairing Key manual
Always turn off the power to the appliance before installing Key
(accessories).
Plug Key into Key housing.
Fig. 5 Position of Key housing
Fig. 6 Locking mechanism
The lever [2] of the locking mechanism is located right hand side of
the Key housing. Ensure that it is in its Open position before pulling
lever [2] towards front.
Turn on the power.
LED [1] starts blinking green.
Wait until LED is constantly yellow.
Note the display:
Set time and date if necessary.
5.2 Key LED
Key LED status
The LED [1] on the Key displays different states with flashing or constant
colours.
Table 6 LED status
5.3 Setting the time program
Time program
The same method for setting the time program for heating is used to set
the time program for hot water.
Press the key.
Select and confirm the Heat. time prog. or DHW time prog.menu.
Select and confirm the Time program menu.
The menu items Mon - Fri, Sat - Sun, Mon ... Sun are displayed.
Possible items to change:
Mon - Fri for change switching times for all weekdays together
Mon ... Sun to change switching times for individual weekdays
Sat - Sun to change switching times for weekends
Select and confirm item you want to change.
Select and confirm time entry you want to change.
To change the time, press the or key.
Press the key.
The new time is saved. Next time entry is selected.
Add one additional switching time block by selecting +. Delete an
existing switching time block by selecting .
0010022807-001
1. 2.
0010023127-001
1
2
Description of the LED displays Example
Flashing red:
Fault, e.g. no communication between the Key and HMI:
Install the key again, restore the last functioning status.
Flashing yellow:
No fault, user please wait.
Flashing green:
No fault, initialisation process is running.
Constant red:
Temporary fault:
Wait for normal operating condition to be resumed.
Constant yellow:
No fault, time and date not available:
Set the time and date on the appliance.
-or-
Keys with button: Press button on key to start pairing.
Constant green:
No fault, normal operating condition.
LED Off:
No fault, power-saving mode or appliance without power.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Worcester-Bosch Greenstar 8000 Style wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info