Bedienungsanleitung Worcester-Bosch Greenstar Comfort II RF - 2014-2022 (Seite 8 von 20) (Englisch)

809344

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Operation

Comfort II– 6720810965 (2014/07)

The Programmable room thermostat will display the current

room temperature.

3.4 Pairing/Unpairing the units

3.4.1 Programmable room thermostat - Installer menu -

Radio settings - Pairing/Unpairing mode

The Programmable room thermostat Pairing/Unpairing

function is found under the Installer menu, in Radio settings

and Pair.

To enter the Installer menu, press the menu button and return

button for more than three seconds.

Six icons are shown across the top of the display:

1. Heating

2. Hot water

3. Holiday

4. Info

5. Settings

6. Installer setting

Turn the knob to select the Installer icon and press the

knob to enter the function.

▶ Turn the knob to select Radio settings

▶ Press the knob to display Pairing, that is RF pairing of the

devices in the system

▶ Turn the knob to display Unpairing or Pairing

▶If Pairing is chosen, press the knob and pairing is displayed

with advancing dashes, when the pairing is completed a

number is displayed confirming the number of

Programmable room thermostats connected, typically one

unit.

▶If Unpairing is chosen, press the knob and Unpairing is

displayed with advancing dashes, when the unpairing is

completed a 0 is displayed confirming that the

Programmable room thermostat has been disconnected

3.4.2 Receiver - Pair/Unpair

With the Programmable room thermostat in the pairing mode,

press the override push button on the Receiver for more than

five seconds but less than 10 to enter the pairing mode. The

LED with flash two quarter second flashes at the beginning of a

five second period to indicate the pairing function.

With the Programmable room thermostat in the unpairing

mode, press the override push button on the Receiver for more

than 10 seconds to enter the unpairing mode. The LED will

flash five quarter second flashes at he beginning of a five

second period to indicate the unpairing function.

4Operation

The Programmable room thermostat is supplied with factory

set default CH times and temperature periods and DHW ON and

OFF times that are shown in the table below. These settings can

be reset according to the homeowner’s requirements via the

User menu function on the Programmable room thermostat, 

section 5.1. The times and temperatures can be reset to the

factory setting via the User menu section 5.1.5. Settings -

Reset all.

4.1 Normal operation

During normal operation the display shows:

• current room temperature

• the operational modes of the central heating and hot water

• the current time and day, with am or pm for the 12 hour

time format are displayed when the screen is back lit, but

are not displayed when the screen dims after 20 seconds of

inactivity

Low battery

A battery symbol indicates the batteries require replacing,

refer to section 9.1

Burner ON indicator

The symbol is shown when the boiler is firing and heating up,

there can be up to a six minute delay between the boiler

indication and the programmer display.

Low RF signal strength

The A21 fault code indicates no RF signal, refer to section 5.2

Installer/Radio settings and section 6.2 Pairing/Unpairing.

Set the current time and date

▶ Hold the menu button down for more than

3 seconds to enter the user menu, turn the

knob to select Settings and press to enter

▶ Refer to section 5.1.5 Settings - Time/

Date for setting the Time and Date, and

clock format

The Programmable room thermostat and

Receiver are delivered together and are

factory paired, they automatically connect

when the system is switched on. There is no

need to pair/unpair the units during

installation, unless there is a problem with

one or both the units.

If a faulty unit is replaced with a new unit, then

the existing unit must be unpaired before the

two units can be paired.

If the units have to be paired/unpaired, all units

must be in the same pairing/unpairing mode.

06:30 08:30 16:30 22:30

CH 1st 2nd 3rd 4th

CH TEMP 20 °C 16 °C 21 °C 10 °C

DHW ON OFF ON OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worcester-Bosch Greenstar Comfort II RF - 2014-2022 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info