809330
21
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
ERROR MANAGEMENT
6 720 642 344 (2010/01) 21
8.5 ALARM WINDOW
8.5.1 TRIPPED LOW PRESSURE SWITCH
Fig. 49
POSSIBLE CAUSE 1: EVAPORATOR BLOCKED.
BClean evaporator (Æ chapter 7.5).
BSelect Acknowledge.
BWait until the heat pump starts again.
BNotify customer service if the alarm occurs frequently.
POSSIBLE CAUSE 2: FAN BLOCKED.
BRemove debris that blocks the fan.
BSelect Acknowledge.
BWait until the heat pump starts again.
BNotify customer service if the alarm occurs frequently.
Possible cause 3: Refrigerant circuit fault.
BSelect Acknowledge.
BWait until the heat pump starts again.
BNotify customer service if the alarm occurs frequently.
8.5.2 TRIPPED HIGH PRESSURE SWITCH
Fig. 50
POSSIBLE CAUSE 1: AIR IN THE HEATING SYSTEM.
BSelect Acknowledge.
BCheck whether air is in the heating system.
BFill the heating system and vent if required.
POSSIBLE CAUSE 2; BLOCKED PARTICLE FILTER:
BSelect Acknowledge.
BCheck filter.
BClean filter if required (Æchapter 7.4).
POSSIBLE CAUSE 3: INADEQUATE FLOW RATE
ACROSS THE HEAT PUMP.
BSelect Acknowledge.
BCheck whether the primary heating circuit pump has
stopped.
BCheck whether all valves are open. In a heating
system incorporating thermostatically controlled
valves, these valves must be fully open. In underfloor
heating systems, at least 50% of all heating loops
must be open.
BWhere appropriate, select a higher speed for the
primary heating circuit pump.
BNotify customer service if the fault continues to occur.
8.5.3 FAILURE / SHORT CIRCUIT ON SENSOR
Fig. 51
All sensors connected to the heating installation can give
an alarm in the event of a fault. In the example, it is
sensor T3, hot water, which has given an alarm. All
sensors give alarms in the same way.
PROBABLE CAUSE 1; TEMPORARY FAULT:
BWait.
PROBABLE CAUSE 2; DEFECTIVE SENSOR OR
INCORRECT CONNECTION:
BNotify customer service if the fault continues to occur.
8.5.4 FAULTY FUNCTION IN 4-WAY VALVE
Fig. 52
POSSIBLE CAUSE 1: 4-WAY VALVE FAULTY.
BSelect Acknowledge.
BNotify customer service if the alarm occurs frequently.
6 720 641 467-18.1I
6 720 641 467-19.1I
6 720 641 467-20.1I
6 720 641 467-21.1I
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Worcester Greensource wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info