Bedienungsanleitung Workzone 2024001 (Seite 6 von 16) (Englisch)

724625

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

AFTER SALES SUPPORT

(toll free)

e-mail: info.aldi@positecgroup.com1300 889 028

24V Lithium-ion Cordless Drill with Hammer Action

MODEL: №.2024001 • 02/2019 • 63524

8 9

d. Keep the charger clean. Contamination will increase the risk of an electrical

shock.

e. Check the charger, cable and plug each time you use the unit. Do not use

the charger if you nd any damage. Never open the charger up yourself, have

it repaired by a qualied specialist only and with original replacement parts.

A damaged charger, cable or plug will increase the risk of an electrical shock.

f. Never operate the charger on a surface that will burn easily (for example,

paper, textiles etc) or in a ammable environment. There is a risk of re

occurring as a result of the heat generated during the charging process.

g. Fluid can escape from the battery when used incorrectly. Avoid all contact

with this. In the event of accidental contact, rinse with water. If liquid should

get into the eyes, get medical assistance. Battery uid may result in skin

irritations and burns.

h. Do not open the battery. There is a risk of short-circuiting.

i. Protect the battery from heat, for example, from constant sun and re.

There is a risk of explosion.

j. Never short circuit the battery. There is a risk of explosion.

k. In the event of damage and incorrect use, vapours may come out of

the battery. Ensure your work space is well ventilated with fresh air and, if

you have any symptoms, consult a doctor. These vapours may irritate the

respiratory system.

Safety rules for cordless drill/driver

a) Hold tool by insulated gripping surfaces when performing an operation

where the drill/driver bits may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal parts of the tool “live” and

shock the operator.

b) Always wear safety goggles or eye protection when using this tool.

Use a dust mask or respirator for applications which generate dust.

c) Secure the material being drill/drivered. Never hold it in your hand or

across legs. Unstable support can cause the drill/driver bit to bind causing loss

of control and injury.

d) Position yourself to avoid being caught between the tool or side handle

and walls or posts. Should the bit become bound or jammed in the work,

the reaction torque of the tool could crush your hand or leg.

e) If the bit becomes bound in the workpiece, release the trigger

immediately, reverse the direction of rotation and slowly squeeze the trigger

to back out the bit. Be ready for a strong reaction torque. The drill/driver body

will tend to twist in the opposite direction as the drill/driver bit is rotating.

f) Do not grasp the tool or place your hands too close to the spinning chuck

or drill/driver bit. Your hand may be lacerated.

g) When installing a drill/driver bit, insert the shank of the bit well within

the jaws of the chuck. If the bit is not inserted deep enough, the grip of the

jaws over the bit is reduced and the loss of control is increased.

h) Do not use dull or damaged bits and accessories. Dull or damaged bits

have a greater tendency to bind in the workpiece.

i) When removing the bit from the tool avoid contact with skin and use

proper protective gloves when grasping the bit or accessory. Accessories may

be hot after prolonged use. Check to see that keys and adjusting wrenches are

removed from the drill/driver before switching the tool on. Keys or wrenches

can y away at high velocity striking you or a bystander.

j) Do not run the drill/driver while carrying it at your side. A spinning drill/

driver bit could become entangled with clothing and injury may result.

WARNING! Some dust created by power sanding, sawing, grinding, drill/

driving, and other construction activities contains chemicals known to cause

cancer, birth defects or other reproductive harm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Workzone 2024001 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info