724652

Workzone 300PCE Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/3
Nächste Seite
1 x Gauge / Screw Guide
21 x Zinc Plated Masonry Drill Bits
3 x Zinc Plated Masonry Drill Bits
4 x 300mm Flat Wood Bits
5 x Flat Wood Bits
3 x Nail Punch, 1 x Centre Punch Black Finished
4 x Hole Saws Black Finished
1 x Hole Saw Adapter Black Finished
10 x Nut Drivers
1 x Countersink Bit
4 x Drill Stoppers Black Finished
50 x High Speed Steel
Titanium Coated Drill bits
33 x 50mm
Screwdriver Bits
55 x 25mm
Screwdriver Bits
1 x Chrome Plated
Magnetic Holder Bit
High quality moulding with each
accessory having its own, clearly
marked and precise location
Innovative, heavy duty
3 compartment storage
with 2 removable drawers
66 x High Speed
Steel Black Finished
Twist Drill bits
3 x Screw
Finders
1 x 2.5mm
Allen Key
Black Finished
33 x Wood Boring
Black Finished Drill Bits
Know your product
Drill Bit Usage Guide
1. Open/loosen chuck. 2. Insert required bit. 3. Tighten chuck 4. Drill.
Quantity Description Picture Material / Application
66 High Speed Steel Black Finished Twist Drill bits (4241#)
5 each of 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm and 4mm
4 each of 4.5mm, 4.8mm, 5mm and 5.5mm
1 each of 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 9mm, 10mm, 11mm, 12mm and 13mm
50 High Speed Steel Titanium Coated Drill bits (4241#, Edge Ground)
4 each of 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, and 4mm
2 each of 4.5mm, 4.8mm, 5mm and 5.5mm
1 each of 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 9mm, 10mm, 11mm, 12mm and 13mm
55 25mm Screwdriver Bits (CRV-6150#, Sand Blasted)
2 each of Slotted: 3mm, 4mm, 5mm, 5.5mm, 6mm, 7mm and 8mm
2 each of Phillips: #0, #1, #2 and #3
2 each of Pozi: #0, #1, #2 and #3
1 each of Square: #1, #2 and #3
1 each of Star: T10, T15, T20, T25, T27, T30, T40 and T45
1 of each Inch Hex 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, ¼”, 9/32”
1 each of Metric Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm
33 50mm Screwdriver Bits (CRV-6150#, Sand Blasted)
1 each of Slotted: 3mm, 4mm, 5mm, 5.5mm, 6mm, 7mm and 8mm
1 each of Phillips: #0, #1, #2 and #3
1 each of Pozi: #0, #1, #2 and #3
1 each of Square: #1, #2 and #3
1 each of Star: T10, T15, T20, T25, T27, T30, T40 and T45
1 each of Metric Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm
33 Wood Boring Black Finished Drill Bits (Carbon, 45#)
4 each of 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm
1 each of 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 10mm, 11mm, 12mm, 13mm
21 Zinc Plated Masonry Drill Bits (Carbon: 45#, Heat treated, YG8 Tip)
2 each of 4mm x 75mm, 4.5mm x 85mm, 5mm x 85mm, 5.5mm x 85mm,
6mm x 100mm, 6.5mm x 100mm
1 each of 7mm x 100mm, 7.5mm x 100mm, 8mm x 120mm, 8.5mm x 120mm,
9mm x 120mm, 10mm x 120mm, 11mm x 150mm, 12mm x 150mm, 13mm x 150mm
10 Nut Drivers (Carbon: 45#, Sand Blasted)
1 each of 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
5 Flat Wood Bits (Carbon: 45#, Polish)
1 each of 13mm, 16mm, 19mm, 22mm, 32mm
4 300mm Flat Wood Bits (Carbon: 45#, Polish)
1 each of 8mm, 10mm, 12mm, 14mm
4 Drill Stoppers Black Finished (Carbon: 45#)
1 each of 3mm, 5mm, 6mm, 10mm
4 Hole Saws Black Finished (Carbon: 45#)
1 each of 45mm, 54mm, 60mm, 64mm
3 Zinc Plated Masonry Drill Bits (Carbon 45#, Heat treated, YG8 Tip)
1 each of 8mm x 300mm, 10mm x 300mm, 12mm x 300mm
3 Screw Finders (ABS)
3 Nail Punch Black Finished (Carbon: 45#)
1 each of 2/32”, 3/32”, 4/32
1 Centre Punch Black Finished (Carbon: 45#) 1/32”
1 2.5mm Allen Key Black Finished (Carbon 45#)
1 Chrome Plated Magnetic Holder Bit (Carbon 45#)
1 Counter Sink (Carbon 45#, Sand Blasted)
1 Gauge / Screw Guide (Carbon: Q295W, Plaint)
1 Hole Saw Adapter Black Finished (Carbon: 45#)
Application: Designed for drilling relatively small holes.
HSS (High Speed Steel) stands up to higher temperatures
Material: Suitable for use on timber, metal, plastics and
similar materials.
Application: Designed for drilling relatively small holes.
Titanium coating increases the hardness of the bit and
adds a self-lubricating property.
Material: Suitable for use on timber, metal, plastics and
similar materials.
Application: Used for driving / removing various types
of screws. Hexagonal shank for use with majority of
power drill/ driver, and screwdriver type tools.
NOTE: Not recommended for Impact Drivers.
Material: Suitable for use on timber.
Application: Used for driving / removing various types
of screws. Hexagonal shank for use with majority of
power drill/ driver, and screwdriver type tools.
NOTE: Not recommended for Impact Drivers.
Material: Suitable for use on timber.
Application: Features “brad point” tips (aka W-point
tip) allowing easy centering/positioning of the hole to
be drilled. Designed for boring smooth, accurate holes.
Suitable for using for dowelling.
Material: Suitable for drilling into timber.
Application: Brittle materials will require slower speeds
and light to moderate pressure as material is being
ground, not broken. The fast spiral ute design creates
less heat buildup when drilling.
Material: Suitable for use when rotary drilling into
brick, cinder block, tile, plaster, stone or concrete.
Used for tightening nuts and bolts. They feature a hollow
shaft that allow removal of nuts from protruding bolts.
NOTE: Not recommended for Impact Drivers.
Application: Used to drill fairly large holes leaving a at
bottomed hole (with a central point).
Material: Suitable for use where the head of a screw/
bolt needs to be recessed into the timber.
Application: Used to drill fairly large holes leaving a at
bottomed hole (with a central point).
Material: Suitable for use where the head of a screw/
bolt needs to be recessed into the timber.
Used to clamp around the drill bit by tightening a set
screw. Suitable for drilling several holes to exactly the
same depth.
Application: Used for cutting large, xed, diameter
holes in wood or plastic. Best used in a power drill/
driver at low speed as the blade saws its way through
the material.
Material: Suitable for use in timber or plastic
Application: Brittle materials will require slower speeds
and light to moderate pressure as material is being
ground, not broken. The fast spiral ute design creates
less heat buildup when drilling.
Material: Suitable for rotary drilling into brick, cinder
block, tile, plaster, stone or concrete.
Put the screw nder onto the shaft of your drill/driver,
with the slotted bit inside the screw nder. The sleeve
centres the bit onto the heads of slotted screws, preventing
the bit from slipping out of the slot and making driving
them easier.
Nail punches are metal rods that have a small blunt
edge placed on a nail while the back of the punch is hit
with a hammer to drive the nail below the timber surface.
A centre punch is a metal rod with a conical point for
making an indentation, to allow a drill to make a hole at
the same spot without slipping.
Allen Key - tool of hexagonal cross-section used to drive
bolts and screws that have a hexagonal socket in the head.
Magnetic Bit Holder - for holding magnetic bits in place.
Counter Sink - used in a power or hand drill to form
the conical recess for the heads of countersunk screws.
Designed for use on soft materials such as timber and
plastics, not metals.
Gauge / Screw Guide - used in conjunction with driver
bits and the screw to assist with the bit aligning with the
screw head.
Hole Saw Adapter - used in conjunction with hole
saw bits.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Workzone 300PCE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info