Bedienungsanleitung Workzone MWW706S-35L (Seite 5 von 16) (Englisch)

724654

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

General power tool safety warnings

c. Prevent unintentional starting. Ensure the switch is in the “o”

position before connecting to power source and/or battery pack,

picking up or carrying the tool. Carrying power tools with your nger

on the switch or energising power tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench before turning the power tool

on. A wrench or key left attached to a rotating part of the power tool

may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

a. Do not force the power tools. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and o.

Any power tool that cannot be controlled with the switch is dangerous

and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to

operate the power tool. Power tools are dangerous in the hands of

untrained users.

e. Maintain power tools and accessories. Check for misalignment or

binding of moving parts, breakage of parts and any other condition

that may aect the power tool’s operation. If damaged, have the

power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance

with these instructions, taking into account the working conditions

and the work to be performed. Use of the power tool for operations

dierent from those intended could result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean and free from oil and

grease.

Slippery handles and grasping surfaces do not allow for safe handling

and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualied repair person using

only identical replacement parts. This will ensure that the safety of the

power tool is maintained.

6 7

MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406 MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Workzone MWW706S-35L Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info