AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
Battery charging
IMPORTANT! Before attempting to charge the battery, check the plug pack charger
and the battery to ensure the charging equipment matches the battery supplied. The
components are all labelled with component numbers.
CAUTION! The rechargeable battery is not fully charged on leaving the factory. Charge the
rechargeable battery before first use.
CAUTION! The working temperature of the charger is 0°C - 45°C (32°F - 115°F).
Note If the battery pack is incorrectly orientated the battery will not fully enter the base
as depicted.
1. Connect the power supply from the charger adaptor to the charger base via plugging the
socket from the charger adaptor into the charger base housing.
2. Plug in the charger and switch on at the power supply. The green LED indicator located on
the charger base will indicate that the charger base has power connected to it.
3. Align the battery pack with the charger base. Insert the battery pack and slide it firmly into
position. The LED light on the charger will light up red during the charging process. When
the battery is fully charged, the red light will go off.
(See Fig. 3)
Note The battery pack will not charge, or will not
operate the drill/driver if the battery cells are too hot.
Remove the battery pack from the charger or drill/
driver and allow the battery pack to cool by placing
in an area out of the sun, or hot environments. Place
battery pack in cool moving air. Do not force cooling.
Do not place in the fridge.
Battery Charging
7
Fig. 3
