AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
Troubleshooting / FAQ’s
Storage
For storage of your drill/driver, charge between 50 and 75%. Avoid allowing loose items like
screws or nails etc. to be stored with battery packs as these or similar items can short battery
packs and cause a fire or explosion.
Always unplug the charger when not in use and store in a dry secure place.
Avoid charging or storing your battery in temperatures below 0ºC and above 40ºC.
Transport
When transporting your drill/driver, we recommend it is placed inside a suitable sealed
storage container with the batteries removed from the drill/driver, and the drill/driver in the
lock position. Ensure the drill is not near water or extreme heat (above 40 °C (104°F)).
Chuck replacement
The chucks of reversible drill/driver’s are always xed by a screw with a left-hand thread.
The screw, which is located in the centre of the chuck, must be removed before the chuck
can be removed. To remove the screw, turn it in a clockwise direction. The chuck can now be
removed by unscrewing it anti-clockwise. If you have trouble removing the chuck take the
drill to your nearest authorised service centre for chuck replacement.
CAUTION! Always ensure that the drill/driver is switched off and the battery pack is
removed before making any adjustments.
Maintenance
10
