Bedienungsanleitung Worx WG168E (Seite 8 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

576041

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Cordless Lawn Trimmer/Lawn Edge Trimmer

1. THREE SPEED SETTINGS

2. AUXILIARY HANDLE

3. AUXILIARY HANDLE LOCKING CLAMP

4. SAFETY GUARD

5. EDGE GUIDE

6. SHAFT LOCKING KNOB

7. ON/OFF SWITCH

8. LOCK OFF SWITCH

9. BATTERY PACK

10. LINE CUTTER

11. TRIMMER HEAD COVER (See Fig. J2)

12. CAP RELEASE LATCH (See Fig. J2)

13. SPOOL (See Fig. J2)

14. TRIMMER HEAD (See Fig. J2)

15. EYELET (See Fig. J2)

16. LINE FEED BUTTON (See Fig. I)

Not all the accessories illustrated or

described are included in standard delivery.

TECHNICAL DATA

Type WG168E WG168E.9 (1-designation of

machinery, representative of Cordless grass

Trimmer)

WG168E WG168E.9

Voltage

40V

Max*

No load speed 8300/min

Cutting diameter 33cm

Line diameter 2.0mm

Charging time

1hr

approx.

Machine weight 3.5kg 2.7kg

* Voltage measured without workload. Initial battery

voltage reaches maximum of 40 volts. Nominal

voltage is 36 volts.

NOISE INFORMATION

A weighted sound pressure L

= 82dB(A)

3.0dB(A)

A weighted sound power L

= 96dB(A)

Wear ear protection

VIBRATION INFORMATION

Typical weighted vibration a

= 2.6m/s²

Uncertainty K =1.5m/s²

The declared vibration total value may be used for

comparing one tool with another, and may also be

used in a preliminary assessment of exposure.

WARNING: The vibration emission value

during actual use of the power tool can differ

from the declared value depending on the ways in

which the tool is used dependant on the following

examples and other variations on how the tool is

used:

How the tool is used and the materials being cut or

drilled.

The tool being in good condition and well

maintained

The use the correct accessory for the tool and

ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any

anti vibration accessories are used.

And the tool is being used as intended by its design

and these instructions.

This tool may cause hand-arm vibration

syndrome if its use is not adequately managed.

WARNING: To be accurate, an estimation of

exposure level in the actual conditions of use

should also take account of all parts of the operating

cycle such as the times when the tool is switched off

and when it is running idle but not actually doing the

job. This may signiﬁcantly reduce the exposure level

over the total working period.

Helping to minimize your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades.

Maintain this tool in accordance with these instructions

and keep well lubricated (where appropriate).

If the tool is to be used regularly then invest in anti

vibration accessories.

Avoid using tools in temperatures of 10

C or less.

Plan your work schedule to spread any high vibration

tool use across a number of days.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WG168E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WG168E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info