Bedienungsanleitung Worx WG794 (Seite 15 von 52) (Englisch, Französisch, Spanisch)

673102

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Lawn Mowing Robot EN

provided with your Landroid

M. Spare blades are also available at

your nearest WORX retailer.

A. Rotate and flip the blades

Your Landroid

M carries 3 Blades that are all screwed onto the

Blade Turning Disc (13). The Blades allow the Landroid

M do its

job and need care and attention. Every once in awhile, you should

simultaneously rotate and flip all blades for a perfect cut. When

rotating and flipping the Blades, make sure all the Blades are

adjusted at the same time or else it could make the Blade Disc off

balance. If your Landroid

M mows on a normal schedule (daily)

then the Blades should last one season if they are rotated and

flipped every month. Always check to see if the Blades are chipped

or damaged and replace them if they are.

B. Replace the blades (See Fig. L)

After some time, usually every season, your Landroid

M’s Blades

will need to be replaced. Your Landroid

M does not like mowing

while using Blades of different age and quality. So when replacing

the Blades, make sure to replace all of them at the same time.

You can replace them with one of the three spare Blade kits and

extra Blade screws supplied with your Landroid

Before attempting to replace your Landroid

M’s Blades, turn the

power off and put on protective gloves. Then follow these steps:

1. Gently flip the Landroid

M over.

2. Remove the battery cover and remove the battery.

3. Take the screws off the Blades with a screwdriver.

4. Firmly screw on the new Blades.

5. Refit the battery and the battery cover.

IMPORTANT: After screwing the Blade to the Blade

Disc, make sure the Blade is able to spin freely.

6.2 Keep It Clean

WARNING: Before cleaning turn your Landroid

OFF by pressing the ON/OFF Button. Put on

protective gloves before cleaning the Blade Turning

Disc (13) and do not use running water. (See Fig. M, N)

A. Cleaning the body

Your Landroid

M will live a much happier and longer life if it is

cleaned regularly. Although, as your Landroid

M is an electric

machine, you will need to take care when cleaning, so DO NOT

use a hose, high pressure washers or otherwise pour running

water on your Landroid

M, it is best to use a spray bottle filled

with water. When cleaning the machine body use a soft brush

or clean cloth and avoid using solvents or polishes (See Fig. M).

Lastly, make sure that you remove all build up of grass clippings

and debris.

B. Cleaning the Underside

Again, it is important that you power the Landroid

M OFF using the

ON/Off Button and wear protective gloves before touching

the Blade Turning Disc (13).

First, flip your Landroid

M upside down to expose its underside.

Here you will see the Blade Disc (a), the chassis (b), and the Front

Wheel (15) and Driving Wheel(10). Clean everything thoroughly

with a soft brush or moist rag (See Fig. N).

Rotate the Blade Disc to make sure it moves freely and that there

(a)

(b)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WG794 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WG794

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info