Bedienungsanleitung Worx WR105 SI (Seite 18 von 20) (Englisch)

723921

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Owner’s Manual of Lawn Mowing Robot EN

If you want to re-start it, press and to start mowing.

• If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary wire. Please

refer to the previous installation instructions and check your set up with its help.

• If your lawn is divided in two separate areas connected by a corridor less than 1m, one of which is not provided with

the Charging Base: when Landroid

runs out of charge, take it manually to the Charging Base, turn power on by turning

the main switch (8) to “I”(on), press

and , the charge process will start.

• If Landroid

runs abnormally once in a while, please try to restart it. If the problem is not resolved, try to removing and

reinstalling the battery. If the problem is still not resolved, please contact a WORX.

• Do not wash the machine with a high pressure washer. This could cause damage to the battery or the machine.

13. Troubleshooting

If your Landroid

does not work correctly, follow the troubleshooting guide below. If the issue persists, contact your Dealer.

Symptom Cause Action

Landroid

turns on, but the Blade

Disc does not move.

Landroid

is searching for the Charging

Base (unless you press the HOME

button to make it go to the charging

base, or the “Enable boundary cut”

function is operating).

This is normal. Landroid

needs to recharge,

the Blade Disc does not rotate while it is

searching for the Charging Base automatically.

Landroid

vibrates.

Blades may be damaged. Check

condition of the Blade Disc.

Check the Blades, and replace them if damaged.

Remove debris and foreign objects from the

blades and blade disc.

Grass is being cut unevenly.

Landroid

does not work enough hours

per day.

Add more hours to the scheduled mowing

time.

Mowing area is too big.

Try decreasing the size of the mowing area or

adding more hours to the mowing time.

Blades are dull.

Change all the Blades and screws in order to

balance the Bade Disc.

The cutting height is too low for the

length of the grass.

Raise the cutting height and then gradually

lower.

Grass or other object has wrapped

around the blade disc.

Check the Blade Disc and remove the grass

or other object.

There is a build-up of grass in the Blade

Disc or Motor Frame Box.

Make sure the Blade Disc rotates easily. If

need be, you may take off the Blade Disc and

remove the debris.

Your Landroid

is inside its

territory and the boundary wire

is connected. The error indication

light flashes red.

The boundary wire ends are clamped

incorrectly.

Reverse the boundary wire ends.

The charging time is far more

than 2h.

Poor connection caused by debris on

the Charging Strip.

Clean the Contact Pins located on the

Charging Base and the Charging Strip on

Landroid

using a cloth.

The charging protection program has

activated due to high temperature.

Place the charging base in a shady area or

wait until the temperature has cooled down.

The mower does not charge.

There is no power.

Check the power cord is connected properly

to the charger and the charger is connected

to a suitable power supply.

Does not operate correctly while

manually charging.

Refer to manual charging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WR105 SI Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WR105 SI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info